Description
Digi XBee Gateway – ZigBee to Ethernet programmable ZibBee to IP gateway w/ 802.11b/g/n, (1) RJ45 10/100 port & power supply (Int’l)
X2E-Z3C-W1-W
The ConnectPort X2e ZigBee to IP gateway provides low-cost IP networking of RF devices and sensor networks. Featuring an easy development environment, the gateway enables custom applications to run locally while interfacing across existing Ethernet/Wi-Fi networks for WAN connectivity to cloud-based software applications.
ConnectPort X2e products feature an end-to-end development environment based on the iDigi® Dia framework, allowing for rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESP™ provides an IDE featuring device detection, debugging, compiling and downloading of iDigi Dia/Python code to Digi gateways.
iDigi Manager Pro™, a Digi-hosted remote management service, offers a platform for secure, scalable access to an unlimited number of remote assets. In addition, iDigi web services provide seamless integration from Digi gateways into customer back office applications.
Features
Easy-to-use Digi ESP development environment for open source Python or iDigi Device Integration Application (iDigi Dia)
Linux-based OS offers adaptability to changing security and protocol standards
Ethernet and Wi-Fi options for flexible broadband connectivity
iDigi® Device Cloud™ service manages connectivity, configuration and software upgrades as well as application integration via published APIs
iDigi Device Cloud offers secure, scalable access to an unlimited number of remote assets and seamless web services integration from Digi gateways into customer back office applications
The ConnectPort X2e ZigBee to IP gateway provides low-cost IP
networking of RF devices and sensor networks. Featuring an easy
development environment, the gateway enables custom applications to run
locally while interfacing across existing Ethernet/Wi-Fi networks for
WAN connectivity to cloud-based software applications.
ConnectPort X2e products feature an end-to-end development
environment based on the iDigi® Dia framework, allowing for rapid
M2M-specific application development on the industry standard Python
scripting engine. Digi ESP™ provides an IDE featuring device detection,
debugging, compiling and downloading of iDigi Dia/Python code to Digi
gateways.
iDigi Manager Pro™, a Digi-hosted remote management service, offers a
platform for secure, scalable access to an unlimited number of remote
assets. In addition, iDigi web services provide seamless integration
from Digi gateways into customer back office applications.
|
Specifications
|
ConnectPort® X2e for Smart Energy
|
|
General
|
|
Management
|
Secure enterprise management via iDigi® Device Cloud™
|
|
Protocols
|
UDP/TCP, DHCP
|
|
LEDs
|
Power, Network (LAN/WAN), ZigBee (HAN/PAN)
|
|
Security
|
SSL tunnels
|
|
ZigBee
|
XBee® ZB SMT transmit power 6.3 mW (+8 dBm);
Receiver sensitivity (1%
PER) -102 dBm
|
Dimensions
(L x W x H)
|
3 in x 3 in x 1 in (7.62 cm x 7.62 cm x 2.54 cm)
|
|
Weight
|
0.15 lb (0.07 kg)
|
|
Development
|
|
ZigBee Public Application Profile
|
Smart Energy 1.1 (Backwards compatible to 1.0)
|
|
Python Version
|
2.7.1
|
Memory (User-available memory varies
by firmware and OS
version)
|
64 MB Ram, 128 MB Flash
|
|
Ethernet
|
|
Ports
|
1 RJ-45 port
|
|
Physical Layer
|
10/100Base-T
|
|
Data Rate
|
10/100 Mbps (auto-sensing)
|
|
Mode
|
Full or half duplex (auto-sensing)
|
|
Wi-Fi
|
|
802.11
|
b/g/n
|
|
Data Rate
|
Up to 72.2 Mbps
|
|
Transmit Power
|
18 dBm typical (varies by mode and channel)
|
|
Receiver Sensitivity
|
-87 dBm @ 11 Mbps
|
|
Modes
|
Ad-hoc & AP Client Modes only; Access Point Mode not supported
|
|
Power Requirements
|
|
Power Input
|
5 VDC
|
|
Power Supply
|
5 VDC power supply with barrel connector included
|
|
Power Consumption
|
Typical: 1.2 W, Max: 2.5 W
|
|
Environmental
|
|
Operating Temperature
|
0° C to 40° C (32° F to 104° F)
|
|
Relative Humidity
|
5% to 95% (non-condensing)
|
|
Ethernet Isolation
|
500 VAC min per IEEE802.3/ANSI X3.263
|
|
Regulatory Approvals
|
|
Safety
|
EN60950
|
|
Emissions/Immunity
|
CE, FCC Part 15 (Class B), IC, ETSI
|
|
|
The ConnectPort X2e ZigBee to IP gateway provides low-cost IP
networking of RF devices and sensor networks. Featuring an easy
development environment, the gateway enables custom applications to run
locally while interfacing across existing Ethernet/Wi-Fi networks for
WAN connectivity to cloud-based software applications.
ConnectPort X2e products feature an end-to-end development
environment based on the iDigi® Dia framework, allowing for rapid
M2M-specific application development on the industry standard Python
scripting engine. Digi ESP™ provides an IDE featuring device detection,
debugging, compiling and downloading of iDigi Dia/Python code to Digi
gateways.
iDigi Manager Pro™, a Digi-hosted remote management service, offers a
platform for secure, scalable access to an unlimited number of remote
assets. In addition, iDigi web services provide seamless integration
from Digi gateways into customer back office applications.
|
Specifications
|
ConnectPort® X2e for Smart Energy
|
|
General
|
|
Management
|
Secure enterprise management via iDigi® Device Cloud™
|
|
Protocols
|
UDP/TCP, DHCP
|
|
LEDs
|
Power, Network (LAN/WAN), ZigBee (HAN/PAN)
|
|
Security
|
SSL tunnels
|
|
ZigBee
|
XBee® ZB SMT transmit power 6.3 mW (+8 dBm);
Receiver sensitivity (1%
PER) -102 dBm
|
Dimensions
(L x W x H)
|
3 in x 3 in x 1 in (7.62 cm x 7.62 cm x 2.54 cm)
|
|
Weight
|
0.15 lb (0.07 kg)
|
|
Development
|
|
ZigBee Public Application Profile
|
Smart Energy 1.1 (Backwards compatible to 1.0)
|
|
Python Version
|
2.7.1
|
Memory (User-available memory varies
by firmware and OS
version)
|
64 MB Ram, 128 MB Flash
|
|
Ethernet
|
|
Ports
|
1 RJ-45 port
|
|
Physical Layer
|
10/100Base-T
|
|
Data Rate
|
10/100 Mbps (auto-sensing)
|
|
Mode
|
Full or half duplex (auto-sensing)
|
|
Wi-Fi
|
|
802.11
|
b/g/n
|
|
Data Rate
|
Up to 72.2 Mbps
|
|
Transmit Power
|
18 dBm typical (varies by mode and channel)
|
|
Receiver Sensitivity
|
-87 dBm @ 11 Mbps
|
|
Modes
|
Ad-hoc & AP Client Modes only; Access Point Mode not supported
|
|
Power Requirements
|
|
Power Input
|
5 VDC
|
|
Power Supply
|
5 VDC power supply with barrel connector included
|
|
Power Consumption
|
Typical: 1.2 W, Max: 2.5 W
|
|
Environmental
|
|
Operating Temperature
|
0° C to 40° C (32° F to 104° F)
|
|
Relative Humidity
|
5% to 95% (non-condensing)
|
|
Ethernet Isolation
|
500 VAC min per IEEE802.3/ANSI X3.263
|
|
Regulatory Approvals
|
|
Safety
|
EN60950
|
|
Emissions/Immunity
|
CE, FCC Part 15 (Class B), IC, ETSI
|
|
Reviews
There are no reviews yet.