Digi XBee-PRO XTC, 1W, DigiMesh, SMT, RF Pad, North America (*MOQ May Apply)

Description

Digi XBee-PRO XTC, 1W, DigiMesh, SMT, RF Pad, North America (*MOQ May Apply)
XBP9XT-DMRS-001

XTend RF modules provide unprecedented range in a low-cost wireless data solution. The modules are easy-to-use, require minimal power and provide reliable delivery of critical data between devices. They are also available in the smaller XBee SMT form factor, ideal for applications that are tight on PCB space.

The XTend module utilizes FHSS (Frequency Hopping Spread Spectrum) agility to avoid interference by hopping to a new frequency on every packet transmission or re-transmission. Its transmit power is software adjustable from 100 mW to 1 W—the maximum output power allowable by governments that use 900 MHz as a license-free band. The XTend module is approved for use in the United States, Canada, Australia and other countries (contact Digi for a complete listing).

Features
ISM 900 MHz operating frequency
100 mW – 1 Watt power output (up to 40 mile range*)
256-bit AES Encryption
Available with DigiMesh®
Available in smaller, lower power XBee Surface Mount form-factor
Documentation
PDF User Guide
Specifications XTend vB Module XBee-PRO XTC Module XBee XTC Module
PERFORMANCE
FREQUENCY RANGE ISM 902 – 928 MHz
INDOOR/URBAN RANGE* Up to 1000 feet (305 m) with 2.1 dB dipole antenna Up to 1000 feet (305 m) with 2.1 dB dipole antenna Up to 360 ft (110 m)
OUTDOOR RF LINE-OF-SIGHT RANGE* Up to 40 miles (64 km) with high gain antenna; Up to 14 miles (22 km) with 2.1 dB dipole antenna Up to 40 miles (64 km) with high gain antenna; Up to 14 miles (22 km) with 2.1 dB dipole antenna Up to 5 miles with high gain antenna
TRANSMIT POWER (SOFTWARE SELECTABLE) 100 mW – 1 W (20 – 30 dBm) 100 mW – 1 W (20 – 30 dBm) Up to 13 dBm
INTERFACE DATA RATE 1,200 – 230,400 bps (including non-standard baud rates)
RECEIVER SENSITIVITY (1% PER) -110 dBm (@9,600 bps throughput data rate), -100 dBm (@115,200 bps)
RF DATA RATE 10 kbps to 125 kbps
HARDWARE INTERFACE 20 pin 2 mm pitch header 37 castellated SMT pads 37 castellated SMT pads
SIZE 3.7 cm x 6.1 cm x 4.8 cm 3.38 cm x 2.21 cm x 1.29 cm 3.38 cm x 2.21 cm x 1.29 cm
ANTENNA OPTIONS MMCX, RPSMA RF Pad, U.FL RF Pad, U.FL
NETWORKING AND SECURITY
SPREAD SPECTRUM FHSS (Frequency Hopping Spread Spectrum)
MODULATION FSK (Frequency Shift Keying)
SUPPORTED NETWORK TOPOLOGIES Point-to-Point, Point-to-Multipoint, Repeater, Mesh
CHANNEL CAPACITY 10 hop sequences share 50 frequencies
ENCRYPTION 256-bit / 128-bit AES
POWER REQUIREMENTS
SUPPLY VOLTAGE 2.8 – 5.5 VDC 2.6 – 3.6 VDC 2.4 – 3.6 VDC
RX CURRENT 35 mA @ 5V 40 mA @ 3.3V 40 mA @ 3.3V
TRANSMIT CURRENT Up to 710 mA @ 30 dBm Up to 900 mA @ 30 dBm Up to 55 mA @ 13 dBm
SHUTDOWN MODE POWER DOWN 1 µA typical
PIN SLEEP POWER DOWN < 147 μA 2.5 uA 2.5 uA CYCLIC SLEEP (IDLE CURRENT) 0.3 – 0.8 mA (16 sec cyclic sleep) ENVIRONMENTAL OPERATING TEMPERATURE -40º C to 85º C (Industrial) CERTIFICATIONS FCC ID (U.S. CERTIFICATION PART 15.247) MCQ-XBPSX MCQ-XBPSX MCQ-XBSX IC ID (CANADA) 1846A-XBPSX 1846A-XBPSX 1846A-XBSX C-TICK (AUSTRALIA) RCM