Lumina Intermediate Calendered Air Advantage Adhesive 7233 Matte

Description

FDC Intermediate Calendered Air Advantage Adhesive 7233 Matte
FDC 7233 Series is an intermediate grade calendered vinyl film designed for printing general purpose graphics,
signage and decals requiring medium-term durability with clean removal. This product features Air Advantage™
a repositionable opaque adhesive, which provides ease of application without bubbles or wrinkles.

FDC 7233 Series is an intermediate grade calendered vinyl film designed for printing general purpose
graphics, signage and decals requiring medium-term durability with clean removal. This product
features Air Advantage™ a repositionable opaque adhesive, which provides ease of application without
bubbles or wrinkles.
Reference: Application Guide: Air Advantage™ Adhesive
Film Technology: ………….. Calendered – PVC
Film Thickness:…………….. 3.0 mil.
Color Availability:………….. Gloss White (002), Matte White (049)
Outdoor Durability: ……….. 5 years – when properly processed and applied
(*Expected Durability: unprinted media, vertical exposure and ideal conditions.)
Adhesive: ……………………… A2 – Permanent (Clean Removal) / Grey – Acrylic
(*Clean removal = up to 2 years from most surfaces. Removable = up to 3 years
from most surfaces with 30% or less residual adhesive. May require the use of heat
and or chemicals. The use of primers and adhesion promoters may greatly increase
the amount of residual adhesive.)
Adhesion:……………………… 1.5 lbs/in – 15 min, 2.5 lbs/in – 24 hrs
(PSTC-1, 180 peel @ 12” / min, 73 F, on stainless steel. Typical values –
individual values may vary. Test prior to use.)
Liner: ……………………………. 90# Layflat
Application: ………………….. Flat Surfaces, Simple Curves
(This product will tent when used over rivets and corrugations and should not be
used over complex curves, recessed and concave areas.)
Printing:………………………… Solvent, Eco Solvent, Latex
(*A print test is recommended prior to production to determine the suitability of this
product given a particular printer, rip, ink type and ink set. Allow at least 24 hours
for inks to dry and properly outgas prior to lamination, cutting or application.)
Chemical Resistance:……. No Effect: Distilled Water (24 hr), Detergent (24 hr), 10% HCL (10 min),
Gasoline (1 hr), 10% Ammonium Hydroxide 10 min), SAE 20 Motor Oil (10 min),
Anti-freeze (24 hr)
Temperature: …………….. Minimum Application Temperature is 50F
(*Temperature applies for: graphics, substrate and environment.)
Service Temperature is -40F to 180F
Shelf Life:…………………. 1 year – when stored at 70F and 50% relative humidity