General Formulations Concept 234 Graphi-Tex

Description

General Formulations Concept 234 Graphi-Tex

General Formulations Concept 234 Graphi-Tex.
7.0 mil Premium Matte White Woven Polyester Wall Fabric with Removable-Repositionable Clear Pressure-Sensitive Acrylic Adhesive.
• Up to 6 months clean removability on most wall surfaces.
• Print full bleed printing edge to edge with no edge curl.
• Contour cut with no edge fraying.
• Ideal for wall murals, graphics, decals applied to glass, smooth painted walls or non-vinyl surfaces (Interior use only).
• Print compatibility: Solvent, Eco-Solvent, UV digital, Latex, UV screen, and Offset inks.

http://generalformulations.com/PDFs/234-Graphi-Tex.pdf

Concept®
234 is a 7.0 mil premium white matte coated polyester fabric with an acrylic removable pressure sensitive
adhesive backed by a 90# sta flat liner. The combination of fabric and adhesive allows removability of this product from
normal wall surfaces. The 90# release liner provides excellent stability for processing using standard solvent eco-

solvent, UV curable and latex digital inks common to wide format digital printing systems.

Applications Concept®
234 is designed for temporary application of decals and graphics to most types
of painted interior walls. This includes most flat, semi gloss and gloss paint finishes.
Decals may also be applied to sealed wall coverings. The surface must be smooth and
clean prior to application.

Thickness Film 7.0 mils.
Adhesive .8 to 1.2 mils.
Liner 6.7 mils.
(Thickness variation +/- 10%)

Dimensional Stability Good.

Temperature Ranges Minimum application temperature +40°F.
Service temperature -40°F to +200 F.

Ignition Properties ASTM D1929
Flash Ignition Temperature 752°F 400°C
Self Ignition Temperature 788°F 420°C

Removability Removable up to 6 months under normal interior exposure conditions and applications.
Removal of wall fabric should be done at a 180° angle while pulling slowly against itself.

Removability Removable up to 6 months under normal interior exposure conditions and applications.
Removal of wall fabric should be done at a 180° angle while pulling slowly against itself.

Adhesion To standard test panels 4 to 12 oz. /in.
Tested according to PSTC-101 Method A procedures with 24 hour dwell at 70°F and 50%
relative humidity. Typical values. Individual values may vary. Bond to wall surfaces may
vary. Test thoroughly before production.

Storage Stability 6 months shelf life when stored at 70°F and 50% relative humidity.

Product Code Concept®
234-54 54” x 100’
Concept® 234-60 60” x 100’

Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent
penetration resulting in product failure.