General Formulations Concept 235 MotoMark Grip

Description

General Formulations Concept 235 MotoMark Grip

General Formulations Concept 235 MotoMark Grip
4.0 mil Premium Flexible Matte White PVC with High Bond LSE Adhesive.
• Unique “high-bond” acrylic pressure sensitive adhesive, formulated to adhere to low energy surfaces like plastics and powdercoated surfaces.
• Provides ultimate performance in applications such as ATV’s, snowmobiles, motocross bikes, power sport vehicles, helmets, watercraft, and carts, where adhesion and durability is a must.
• Designed to be used with GF Concept 238 MotoMark 12mil “ARMOR” gloss clear UV overlaminate.
• Print compatibility: Solvent, Eco-Solvent, Latex, UV Curable, and Thermal.

http://www.lexjet.com/DataSheets/235MotoMark.pdf

Concept® 235 MotoMark™ 4.0 mil “GRIP” is specially formulated premium flexible matte white PVC film. This film has a unique “High
Bond” acrylic pressure sensitive adhesive with a 90# layflat liner. The adhesive is formulated for the powersport graphic and decal
markets. Concept® 235 MotoMark™ can be printed on a variety of solvent-based, latex, UV and thermal printers that are commonly
used in wide format. This product may also be printed on using other printing processes such as UV screen and UV curable offset but
must be tested before production.

Applications Concept®
235 MotoMark™ is designed for applications where a flexible premium film with special high
bond adhesion is required. Concept®
235 MotoMark™ is recommended for applications such as,
Quads, Snowmobiles, Motocross, Powersport Vehicles, Helmets, and Carts. Testing is always suggested
before application.

· Recommended to use Concept®
238 MotoMark™ 12mil “ARMOR” Gloss Clear UV overlaminate.
This will add ultimate protection, performance and durability to the graphic or decal.

Thickness Film 4.0 mils.
Adhesive 1.8 to 2.2 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)

Dimensional Stability Good
Temperature Ranges Minimum application temperature +40°F.
Service temperature -40°F to +180°F.
Expected Exterior Exposure 5 Years. Under normal exposure conditions

Adhesion To stainless steel 48 oz/in.
PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary. Test thoroughly before production.

Water Resistance Excellent
Humidity Resistance Excellent
Solvent Resistance Excellent
Storage Stability Six months shelf life when stored at 70°F and 50% relative humidity.

Product Codes 235-15P (15” x 150’ roll) “P” Indicates Gerber punched pattern
235-24 (24” x 150’ roll) 235-30 (30” x 150‘ roll)
235-54 (54” x 150’ roll) 235-60 (60” x 150” roll)

Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl
degradation. Always thoroughly test this product to confirm that it meets your requirements. Proper surface preparation requires
cleaning with alcohol or acetone to clean and remove contaminates before application. Failure to prepare the surface can cause
premature failure of the graphic or decal.

* Concept®
235 is a permanent adhesive system. Removing and repositioning are not characteristics of this adhesive system. The above recommendations of this films use
do not suggest or constitute a verbal or written guaranty or warranty by the manufacture or its dealers of this product. Individual purchasers or users shall be responsible for
determining the materials suitability as well as its intended use and application.