Description
General Formulations Concept 222
General Formulations Concept 222
6 Mil Semi-Rigid Matte White Calendered Vinyl with Permanent Adhesive.
• Up to 3 year durability.
• Clear permanent acrylic adhesive.
• 90lb tight release liner.
• Designed for interior and exterior signage, decals, nameplates, and POP.
• Laminate with any Concept 100 Series laminate.
• Easy application without laminate or application tape.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex.
http://generalformulations.com/PDFs/222%20VSR6-AP.pdf
Product Bulletin
Manufacturer of Pressure Sensitive Films,
Traffic Graffic Floor Advertising Films,
Custom Coatings and Printing Inks.
309 S. Union • P.O. Box 158 • Sparta, Michigan 49345 • (616) 887-7387 • (800)253-3664 • FAX (616)887-0537
Web Site: www.generalformulations.com • e-mail: [email protected]
We believe the information on this product to be accurate. However, since we cannot anticipate or control the conditions under which this information or our products may be used, we cannot guarantee
results obtained through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty, either
express or implied. The purchaser should refer to General Formulations, Inc’s Price List for Terms and Conditions or Sale, Including Disclaimer of Warranties and Limitation of Liability.
Concept®
222
SEMI RIGID WHITE MATTE PVC
PERMANENT ADHESIVE
ConceptÒ
222 is a 6.0-mil premium white matte semi rigid calendared PVC film coated with 200-4990 permanent acrylic
pressure sensitive adhesive laminated to a 90# tight release digital liner designed for roll processing. This vinyl film is
designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems.
Applications ConceptÒ
222 is general purpose decal film designed for interior or exterior signage,
decals, nameplates, die-cut letters and point-of-purchase displays.
Thickness Film 6.0 mils.
Adhesive .8 to 1.1 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)
Dimensional Stability Good.
Temperature Ranges Minimum application temperature is +40°F.
Service temperature is -40°F to +180°F.
Expected Exterior Exposure Up to 3 years.
Adhesion To stainless steel 40 oz/in.
PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary.
Test thoroughly before production.
Water Resistance Good.
Humidity Resistance Good.
Solvent Resistance Good
Storage Stability 6-month shelf life when stored at 70°F and 50% relative humidity.
Product Codes 222-54 (54” X 100’ roll)
222-54RW (54” X 100’ roll, reverse wound/notched core)
Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate
solvent penetration resulting in vinyl degradation.