Gerber 210 Fluorescent Film Pink 210-413 P48307A

Description

Gerber 210 Fluorescent Film Pink 210-413 P48307A

210 Fluorescent 15” Punched EDGE READY

Gerber 210 Fluorescent is a vibrant, attention-getting 2 mil film that provides excellent visibility under normal or low light conditions. It is perfect for point of purchase, window graphics, and displays. One-year exterior life.

DESCRIPTION
Gerber HP Series 210 Fluorescent film is a high performance, fluorescent film made exclusively
for Gerber by 3M™. Series 210 is a durable, dimensionally stable film with a white pressuresensitive adhesive. It is available in several colors (see Product Characteristics chart) and is
available in a 15-inch punched format as an EDGE READY™ material.
INTENDED APPLICATIONS
Series 210 is intended for making highly visible, extremely conspicuous day glow signage
including point-of-purchase, safety markings, information posters, signs, and labels. It is well
suited for flat, flat with rivets and simple curved surfaces and for first surface applications.
PERFORMANCE LIFE – (UNPRINTED)
The exterior performance life of Series 210 is based upon field experience and exposure tests
conducted throughout the United States. When the graphics are processed and used according
to Gerber recommendations, they should have a performance life up to the values shown in the
charts below. The actual performance depends on the following conditions:
 Selection and preparation of substrate
 Application methods
 Exposure conditions
 Cleaning methods
Page 2 of 5
Series 210 Unprinted Performance Life*
U.S. 1
1 year
S. W. 2
9 months
*Signs only, applied to first surface, vertical exposure – face of graphic is vertical 90º +/- 10º
1. For exterior performance life statements outside of the United States, contact Gerber Scientific Products, Inc.
2. The United States Desert Southwest area includes Arizona, New Mexico, and the desert areas of California, Nevada, Utah, and
Texas.
SHELF LIFE AND STORAGE
Apply film within one year of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without premask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at less than 100°F (38°C).
Use a paper interleaf between layers of stacked or rolled printed materials. Do not stack printed
graphics face to face.
PRINTING
Use standard Series 210 settings when printing with the GERBER EDGE®, GERBER EDGE
2®, or GERBER EDGE FX™ thermal transfer printing systems. Gerber standard tack
application tape is required to be used as the transfer carrier for all printed graphics.
Series 210 is compatible with GerberColor™ Process Pro™ CMYK (GCP), Spot (GCS),
Transparent (GCT), Medal (GCM) and Finishing (GCF) Foil sets.
Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Scientific Products®, Inc. offers products that are designed to protect vinyl and printed
graphics.
Gerber Guard is a durable, dimensionally stable, glossy vinyl overlaminate. This film has a
petrochemical-resistant construction and is intended to be used when markings may be
exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard is a custom-formulated, 1-mil, clear, TEDLAR® polyvinyl fluoride (PVF)
laminating film designed to further expand the resistance to weathering of printed graphics for
up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
Page 3 of 5
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
Matte Clear is a clear matte finish, top coat GerberColor Foil designed for use with EDGE®
Series thermal transfer printing systems, to reduce glare and protect graphics from moderate
contact or handling. It has an expected performance life of up to three years.
CUTTING
Series 210 EDGE-printed graphics can be cut on any 15-inch EDGE-compatible sprocketed
plotter. Non-printed graphics can be cut on friction cutters or the Gerber ODYSSEY™.
Excess film should be weeded within 24 hours of cutting to minimize the effect of adhesive flow.
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
If applying to glass, wipe the surface with a 2to1 mixture of water and isopropyl alcohol. Glass
temperatures can vary across the surface. These temperature variations can produce stresses,
which may cause the glass to break. Use caution when applying to glass.
Some polycarbonate substrates may weaken when certain vinyl films are applied to them.
Because of this possibility, the user will need to determine if safety items such as helmets,
safety shields, and some windshields are compatible with their vinyl’s adhesive.
Many paint systems (e.g. two-part urethane) and some plastic substrates will outgas if they are
not fully cured. Out gassing can cause permanent bubbling in most films; substrates should be
tested for out gassing prior to final application. Plastics should be dried at 150 ºF (66 ºC) for 24
hours prior to application to help avoid out gassing.
APPLICATION TECHNIQUES
Dry application method is recommended with Series 210. Panels should be overlapped by
0.0625 in (1/16 in). Gerber standard tack application tape is recommended for all EDGE-printed
applications.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
Page 4 of 5
PRODUCT CHARACTERISTICS
Property Description
Thickness (film and adhesive) 3 to 5 mil (0.08 to 0.13 mm)
Film color 210-404 Yellow Orange, 210-405 Lemon Yellow, 210-406
Lime Green, 210-413 Pink, 210-414 Red Orange
Adhesive White pressure-sensitive
Liner White kraft paper
Application substrates For flat, flat with rivets, and simple curves
Application surfaces Metal, enamel, and painted surfaces
Removability Permanent
PHYSICAL PROPERTIES
Property English Units Metric Units
Applied Shrinkage 0.015 in 0.4 mm
Service temperature range -20F to 175F -29C to 80C
Tensile Strength 3.5 lb/in at 73F 0.6 kg/cm at 23C
Min. Application Temperature 60F 16C
ADHESION CHARACTERISTICS
Substrate Value
ABS, Acrylic, Acrylic Enamel, Fruehauf painted
panels, Polycarbonate, Urethane paints
4 lb/in (0.7 kg/cm)
Aluminum, Alodine 8 lb/in (1.4 kg/cm)
Chrome 5 lb/in (0.9 kg/cm)
CHEMICAL RESISTANCE
Series 210 Fluorescent film is resistant to mild acids, mild alkalis and salts. Film has excellent
water resistance.
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
Page 5 of 5
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gspinc.com to learn more about our many other foils, materials and equipment.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, Comply, Controltac, EDGE Positive, EDGE READY, FloorMinders, Gerber AutoMag, GERBER EDGE FX, Gerber enVision, Gerber FastFacts,
Gerber Guard, Gerber HoloGraphix, Gerber ImageCal, Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM,
GerberStardust, Gerber StrikeGuard, GerberTone, Gerber UVGuard, GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask,
GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx, ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, ODYSSEY, OMEGA, Process Pro,
SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
3M, Scotchcal, and Scotchbrand are Trademarks of the 3M Corporation.
TEDLAR is a registered trademark of DuPont.
©2015 Gerber Scientific, Inc. All Right Reserved
Category: EDGE READY™ FastFact #: 5588 Supplied by: Aftermarkets Last Modified: 09/02/15