Gerber 225 High Performance Cast Vinyl Film 225-99 Fawn

Description

Gerber 225 High Performance Cast Vinyl Film 225-99 Fawn
Gerber High Performance Series 225 is a high performance cast vinyl film made exclusively for
Gerber by 3M. Series 225 is a durable, dimensionally stable vinyl with a clear, pressuresensitive adhesive designed to withstand a variety of severe weather and handling conditions. It
is available in numerous, including opaque gloss, metallic, and Clear Enamel Receptive, in both
punched and unpunched formats. Series 225 comes on a synthetic liner which won’t curl or
split when exposed to moisture/humidity.
Note: 15 inch Series 225 is an EDGE READY™ Material. A color chart is included at the end of
This bulletin as well as a PANTONE® Simulated Color Reference Table.
PRODUCT LINE
Property Description
Film 2-mil cast vinyl
Thickness
(film and adhesive)
2.5 to 3.5 mil
(0.063 to 0.09 mm)
Film color Over 25 colors
Page 2 of 8
Property Description
Adhesive Clear, pressure sensitive
Liner Transparent synthetic
Application substrates For flat surfaces with and without rivets, or simple curved surfaces
Application surfaces Flexible signage, glass, metal, acrylic, polycarbonates, fiberglass,
painted surfaces
Removability Permanent
INTENDED APPLICATIONS
Series 225 is suitable for a wide range of commercial and industrial applications including
vehicles, exterior and interior signage, window markings, display graphics, etc. It can be used
on flat surfaces with and without rivets or simple curved surfaces. Series 225 has a clear
adhesive and is therefore suitable for use as a cut vinyl in window/transparent substrate
applications, as well as opaque applications.
PERFORMANCE LIFE (UNPRINTED)
The exterior performance life of Gerber High Performance Series 225 is based upon field
experience and exposure tests conducted throughout the United States. When the graphics are
processed and used according to Gerber recommendations, they will an expected performance
life up to the values shown in the charts below. The actual performance depends on the
following conditions:
? Selection and preparation of substrate
? Application methods
? Exposure conditions
? Cleaning methods
Application Specifics
Performance Life
(years): Unprinted
U.S. 1, 4 S. W. 2, 4
*Vertical
Exposure
Signs Only Solid
colors, except
metallic colors and
clear
Unprinted, applied to first surface 7 5
Unprinted, applied to second surface 7 5
Vehicles Only
Solid colors,
except metallic
colors and clear
Unprinted, applied to first surface 8 5
Unprinted, applied to second surface 8 5
Signs and
Vehicles Metallic
colors and Clear
Unprinted, applied to first surface 5 3
Unprinted, applied to second surface 5 3
Page 3 of 8
Application Specifics
Performance Life
(years): Unprinted
U.S. 1, 4 S. W. 2, 4
**NonVertical
Exposure3
Solid Colors Unprinted, applied to first surface 5
Not
advised
* Face of graphic is vertical 90º ± 10º.
** Face of graphic is greater than 10º from vertical.
1. For exterior performance life statements outside of the United States, contact Gerber Technology.
2. The United States Desert Southwest area includes Arizona, New Mexico, and the desert areas of California, Nevada, Utah, and
Texas. A detailed map is available upon request.
3. Non-vertical applications can be used to identify commercial vehicles from the air. Non-vertical applications expose the film to the
maximum effect from sunlight and the environment. There are foil and film restrictions for horizontal applications. The film may
change color, lose gloss, and chalk. The following performance statements assume that only legibility is required.
4. Unprinted film 225-20 (Matte White) may chalk with age. This is considered normal and acceptable wear.
SHELF LIFE AND STORAGE
Apply film within one year of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without premask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at less than 100°F (38°C).
Use a paper interleaf between layers of stacked or rolled printed materials. Do not stack printed
graphics face to face.
PRINTING
Use Gerber HP Series 225 settings when printing with the GERBER EDGE®, GERBER EDGE
2®, or Gerber EDGE FX™.
GerberColor Finishing (GCF), GerberColor Spot (GCS), GerberColor Process Pro? CMYK
(GCP), GerberColor Medal (GCM), GerberColor Transparent (GCT), and GerberColor Special
Effects (GCX) Series Foils, and ColorSet™ Foils can be used to print onto Series 225 High
Performance Films.
Gerber standard tack application tape is required to be used as the transfer carrier for all printed
graphics.
Recommended working environment is as follows:
? Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
? Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
? Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard? manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Page 4 of 8
Gerber UVGuard? is a custom-formulated, 1-mil, clear, extremely durable polyvinyl fluoride
(PVF) laminating film designed to further expand the resistance to weathering of printed
graphics for up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard? SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
CUTTING
Series 225 can be cut on any Gerber 15-inch sprocketed plotter, plus FasTrack™ or
ODYSSEY™ plotter. A 30° SuperSharp blade is recommended for tangential plotters (HS15™,
HS15 Plus, GSX™, GS15™, GS750™, HS750™, SMIVB™). A 45° blade should be used with
swivel knife plotters (FasTrack, EmbossTrack™, enVision™, and ODYSSEY). Plotters can be
set to full speed.
The minimum recommended cutting height for text is .375 inch. This recommendation is based
upon evaluations using upper case Helvetica Medium copy. Users should verify their own ideal
cut heights based upon their specific cutting equipment. The user should perform a test cut to
determine the ideal tool force setting.
Excess film should be weeded within 24 hours of cutting to minimize the effect of adhesive flow.
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
If applying to glass, wipe the surface with a 2 to 1 mixture of water and isopropyl alcohol. Glass
temperatures can vary across the surface. These temperature variations can produce stresses
which may cause the glass to break. Use caution when applying to glass.
Some polycarbonate substrates may weaken when certain vinyl films are applied to them.
Because of this possibility, the user will need to determine if safety items such as helmets,
safety shields, and some windshields are compatible with their vinyl’s adhesive.
Many paint systems (e.g. two-part urethane) and some plastic substrates will outgas if they are
not fully cured. Outgassing can cause permanent bubbling in most films; substrates should be
Page 5 of 8
tested for outgassing prior to final application. Plastics should be dried at 150ºF (66ºC) for 24
hours prior to application to help avoid outgassing.
APPLICATION TECHNIQUES
Both wet and dry application methods can be used with Series 225 and panels should be
overlapped. Gerber standard tack application tape is recommended for all EDGE-printed
applications (see “Printing” section for important information on applying EDGE-printed
graphics.)
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives. Automated vehicle
washing systems that use rotary cleaning brushes should also be avoided.
PHYSICAL PROPERTIES
Property English Units Metric Units
Dimensional Stability 0.008 in 0.2 mm
Service temperature range -40º to 225ºF -40º to 107ºC
Tensile Strength 5 lb/in at 73ºF 0.9 kg/cm at 23ºC
Reverse impact resistance No cracking at 73ºF or 40ºF No cracking at 23ºC or 4ºC
Minimum Application
Temperature
40ºF 4ºC
ADHESIVE CHARACTERISTICS*
Material English Units – lb/in Metric Units – kg/cm
Acrylic 4 0.7
Alodine aluminum 8 1.4
Fruehauf prepainted panels 4 0.7
Polycarbonate 4 0.7
Urethane paints 4 0.7
* (24 hours after application)
Page 6 of 8
CHEMICAL RESISTANCE
Chemical Agent Exposure Time Result
Reference fuel 1 hour edge softening
#1 diesel fuel 1 hour edge softening
10% Hydrochloric acid 10 minutes no effect
10% Ammonium Hydroxide 10 minutes no effect
Mild acids 10 minutes no effect
Salts 10 minutes no effect
Water 10 minutes no effect
Alkalis 10 minutes no effect
FLAMMABILITY
Series 225-10 (white) has been tested for flame spread per ASTM E84-95, “Surface Burning
Characteristics of Building Materials,” and meets the requirements of National Fire Protection
Association Class A (1) (most fire-resistant class) as defined in NFPA 101, “Life Safety Code.”
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and
equipment.
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
LEXAN is a Registered Trademark of General Electric Company.
3M is a trademark of 3M Company.
enVision is a trademark of 3M Company that is licensed to Gerber.
Page 7 of 8
GERBER HP SERIES 225 COLOR CHART
Solid Colors
225-10 White 225-12 Black 225-13 Tomato Red
225-15 Bright Yellow 225-17 Vivid Blue 225-19 Deep Mahogany Brown
225-20 Matte White 225-22 Matte Black 225-25 Sunflower
225-31 Medium Grey 225-37 Sapphire Blue 225-38 Royal Purple
225-47 Intense Blue 225-49 Beige 225-53 Cardinal Red
225-56 Dark Green 225-57 Olympic Blue 225-58 Burgundy
225-63 Geranium 225-66 Forest Green 225-186 Bright Green
225-197 Light Navy
Metallic Colors
225-120 Silver
225-131 Gold
Clear
225-114 Clear Enamel Receptive
PANTONE® Simulated Color Reference Table
PANTONE
Simulated Color
Gerber HP Series 225
Color Name
GSP
Pigment Code
Process Black C BLACK 225-12
348C BRIGHT GREEN 225-186
109C BRIGHT YELLOW 225-15
4625C DEEP MAHOGANY BROWN 225-19
3302C FOREST GREEN 225-66
872C GOLD – Metallic 225-131
301C INTENSE BLUE 225-47
289C LIGHT NAVY 225-197
Page 8 of 8
PANTONE
Simulated Color
Gerber HP Series 225
Color Name
GSP
Pigment Code
Black C MATTE BLACK 225-22
422C MEDIUM GREY 225-31
7461C OLYMPIC BLUE 225-57
877C SILVER – Metallic 225-120
1235C SUNFLOWER 225-25
1795C TOMATO RED 225-13
PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc. The film colors are approved by Pantone, Inc.
and are referenced by PANTONE color numbers. These films are simulations of PANTONE Colors because the films are not
manufactured using PANTONE Color inks and therefore, cannot be an exact match.
©2018 Gerber Technology. All Right Reserved
Category: EDGE READY™ FastFact #: 5573 Supplied by: Aftermarkets Last Modified: 02/27/18

Gerber 225 High Performance Film manufactured by 3M
Gerber 225 is a high performance 2 mil cast vinyl film on a transparent synthetic liner which is moisture-resistant and offers superior registration for multicolor plotter applications and Gerber EDGE printed graphics. The clear pressure- sensitive adhesive allows for production of attractive two-way markings. Excellent durability with five- to eight-year exterior life.
Gerber 225 Product Bulletin 15” Punched EDGE READY 30” Punched 225 High Performance 24” Unpunched 48” Unpunched 10 Yard 50 Yard 10 Yard 50 Yard Color Code 10 Yard 50 Yard 10 Yard 50 Yard P63845A P63947A P64253A P64355A Black 225-12P84009A P84010A P84013A P84014A
P63844A
P63946A
P64252A
P64354A
Matte Black
225-22
P84017A
P84018A
P84021A
P84022A P63833A P63935A P64241A P64343A Matte White 225-20P84025A P84026A P84029A P84030A
P63834A
P63936A
P64242A
P64344A
White
225-10
P84033A
P84034A
P84037A
P84038A P63840A P63942A Medium Gray 225-31
P63847A
P63949A
P64255A
P64357A
Deep Mahogany Brown
225-19
P84049A
P84050A
P84053A
P84054A P63852A P63954A P64260A P64362A Beige 225-49
P63855A
P63957A
P64263A
P64365A
Bright Yellow
225-15
P84065A
P84066A
P84069A
P84070A P63856A P63958A P64264A P64366A Sunflower 225-25
P85117A
P85118A
NEW Imitation Gold
225-105
P63874A
P63976A
P64282A
P64384A
Tomato Red
225-13P63875A P63977A P64283A P64385A Geranium 225-63P84089A P84090A P84093A P84094A
P63876A
P63978A
P64284A
P64386A
Cardinal Red
225-53
P84097A
P84098A
P84101A
P84102A P63878A P63980A P64286A Burgundy 225-58
P63893A
P63995A
P64301A
P64403A
Sapphire Blue
225-37
P84113A
P84114A
P84117A
P84118A P63894A P63996A Vivid Blue 225-17P84121A P84122A
P63896A
P63998A
P64304A
P64406A
Intense Blue
225-47
P84129A
P84130A P63914A P64016A P64322A P64424A Dark Green 225-56
P63916A
P64018A
P64324A
P64426A
Forest Green
225-66P63918A P64020A P64326A P64428A Clear 225-114P84153A P84154A P84157A P84158A
Gerber 225 Metallic High Performance Film manufactured by3M Gerber 225 metallic is a high performance 2 mil cast vinyl film with the visual addition of a metallic sparkle, on a transparent synthetic liner which is moisture-resistant and offers superior registration for multicolor plotter applications. This film is perfect for use on cars, trucks, boats, RVs, and signs or markings. Excellent durability with five-year exterior life.
Gerber 225 Product Bulletin 15” Punched EDGE READY 30” Punched 225 Metallic HP 24” Unpunched 48” Unpunched 10 Yard 50 Yard 10 Yard 50 Yard Color Code 10 Yard 50 Yard 10 Yard 50 Yard P63933A P64035A P64341A P64443A Gold Metallic 225-131P84169A P84170A P84173A P84174A
P63934A
P64036A
P64342A
P64444A
Silver Metallic
225-120