Gerber CONVEX® GearWrapTM Film 4mil Clear

Description

Gerber CONVEX® GearWrapTM Film 4mil Clear

CONVEX® GearWrapTM 15” Punched EDGE READY Color 10 Yard 50 Yard 4mil Clear P85007A P85096A

Gerber CONVEX®GearWrapTM film is perfect for contact sports decals. It stays in place and removes clean for up to 1 year. Designed for printing on the GERBER EDGE®, GERBER EDGE 2, and GERBER EDGE FX™ printers. It is available in either white or clear and 4mil or 8mil thickness.

On curved surfaces such as helmets, apply by rubbing from the center out. When using Convex as a Laminate, as it is separated from the
liner, if there is too much drag tension applied to the supply roll, it can stretch and will curl up immediately after it is cut on a plotter. Laminate
with a cold pressure sensitive laminator or by hand.
Shelf Life:
Outdoor Life:
Service Temperature Range:
Minimum Application Temp.:
Tests performed | results:
General purpose adhesive works on most surfaces. Gearwrap™
adhesive is formulated to remove cleanly from most surfaces for up
to a year after it is applied.
4 mil. vinyl with 1 mil of adhesive Adhesive Properties:
Material:
General Description: Clear and White, soft, flexible vinyl with a clear permanent acrylic adhesive. Different combinations of Convex® or ProShield™ laminates may be used to achieve a variety of decal thicknesses.
Test Method
2 years
1 yr. stored at 70 F & 50%RH
(-40º F to 176º F)
50º F
Average
OZ/IN Ulitmate Peel from
Recommended
Application
Techniques:
Tack (gm/sq cm) 500
ASTM D 3654 Method A
ASTM D 2979
a. 1 hrl dwell
b. 1 sq. in. surface
c. 4 lb. load
Expected Shear 15
Room Temp (hours)
14
56
27
54
Acrylic 60
Stainless Steel
Painted Polycarbonate
CONVEX® GearWrap™ Clear and White 4 mil.
Omega
Software Settings:
In Omega, design the job on 3M 220 vinyl. Or in Gerber’s Plot program, click on the “123” button, then on the substitute button and select
vinyl. Then select 3M 220 Premium or Gerber ImageCal from the pull-down menu as the vinyl to print on. If you are using laminates on top of
the base material, we recommend test cutting to determine he best cutter settings.
USE A 45º blade or 60º BLADE on any combination of material 8 mil or thicker.
Disclaimer:
All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the
manufacturer or distributor of this product. Although this material can be printed on with some solvent based printers, the surface characteristics of the material can change from roll to roll, and
failure of optimal printing results are not a basis for returning the product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the
intended application. GT0121 Gerber Technology
PRODUCT CHARACTERISTIC SHEET
PLEASE READ BEFORE USING!
Thickness:
Polypropylene
Glass
ASTM D 903 (Modified for 72 hour dwell time)
Company:
Gerber Technology
Date Prepared: Address: 24 Industrial Park Rd. W
Tolland, CT 06084-2806
Phone: 800-222-7446
None
No significant toxic hazard. When burned may produce toxic fumes.
No significant toxic hazard.
Flash Point: N/A
ROUTES OF ENTRY: Method Used: N/A
Inhalation: N/A Skin: N/A Auto-ignition Temperature N/A
Eyes: N/A Ingestion: N/A Flamable limits in Air % by Volume: LEL: N/A, UEL: N/A
Accidental Release Measures: N/A Extinguishing Media: Multi-rated ABC extinguisher or water
None
Respiratory Protection: None required Vapor Pressure (mm Hg) Boiling Point:
Skin Protection: No precautions required Vapor Density (air = 1): Melting Point:
Eye Protection: None required Appearance and odor: Reactivity of water:
Exposure Guidelines: None established Specific Gravity (H 0=1) Solubility in water:
Engineering Controls: None required
Toxicological Information: Stability: N/A
NTP: NONE Conditions to avoid: Fire or Excessive Heat
Ecological Information: No Data Avaialble Incompatibility: None
Transport Information: Hazardous Decomposition Products: None
Hazardous Polymerization: Will not occur.
Regulatory Information:
Disposal Considerations: Waste Disposal:
Dispose of in accordance with Local, State and Federal regulations.
YES
Material Safety Data Sheet (MSDS)
NO
YES
UL Recognized:
Material Name: CONVEX® GearWrap™ Clear & White 4 mil.
General Description: Clear soft flexible vinyl with a clear permanent acrylic adhesive.
ROHS Compliant*:
Composition and information on ingredients:
Individual components of this product do not contribute to any known hazards.
No special handling required other than storing away from
excessive heat sources.
Physical and Chemical properties:
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200): NONE
Hazards Identification:
REACH Compliant:
None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, OSHA, or ACGIH as a carcinogen.
POTENTIAL HEALTH EFFECTS:
ACUTE:
CHRONIC:
N/A
N/A
N/A
* RoHS, EU Directives 2002/95/EC and 2003/11/EC
and RoHS2, EU Directive 2011/65/EU
N/A
N/A
Fire Fighting Measures:
Unusual Fire and Explosion Hazards:
N/A
N/A
Special Fire Fighting Procedures: In case of fire, use self-contained breathing
apparatus and full protective equipment – all fires liberate toxic gases.
Carcinogen Status:
TRANSPORTATION AND HAZARDOUS MATERIALS
DESCRIPTION: Not a hazardous material for DOT shipping.
First Aid Measures:
Emergency and First Aid Procedures:
Handling and Storage:
Exposure Controls and Personal Protection:
The information contained herein is based on the data available to the
OEM, and is believed to be correct. However, Gerber Technology
makes no warranty, expressed or implied, regarding the accuracy of
these data or the results to be obtained from the use thereof. Gerber
Technology and it’s distributors assume no responsibility for injury
from the use of the product described herein.
N/A
Stability and Reactivity:
OSHA STANDARD CFR 29, PART 1910.1200: This product is considered to be
an “article” under this standard.
SARA 313 INFORMATION: This product contains no substances at or above the
reporting threshold subject to the reporting requirement of section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 371,
based on available data.
CALIFORNIA PROPOSITION 65: The following statement is made in order to
comply with the California Safe Drinking Water and Toxic Enforcement Act of 1986.
Warning this product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. This product contains up to
0.01% Toluene in the adhesive.
Other Information:
IARC: NONE OSHA: NONE