Gerber High Performance Series 230 Translucent Vinyl Film 230-147 Light European Blue

Description

Gerber High Performance Series 230 Translucent Vinyl Film 230-147 Light European Blue
DESCRIPTION
Gerber High Performance Series 230 is a high performance translucent film made exclusively
for Gerber. Series 230 is a durable, dimensionally stable film with a clear, pressure-sensitive
adhesive designed to withstand a variety of severe weather and handling conditions. It is
available in a variety of colors and is an EDGE READY™ material in 15-inch punched format.
Series 230 comes on a synthetic liner.
PRODUCT CHARACTERISTICS
Property Description
Thickness (film and adhesive) 2 mils
Film color See color chart
Adhesive Clear, pressure sensitive
Liner Synthetic
Application substrates For flat surfaces without rivets
Application surfaces Flexible signage, glass, acrylic, polycarbonate
Removability Permanent
Page 2 of 5
INTENDED APPLICATIONS
Series 230 is intended for making permanent, durable printed graphics using the GERBER
EDGE®, GERBER EDGE 2®, and GERBER EDGE FX? thermal transfer printing systems, in
conjunction with GerberColor™ Foils. It is well suited for flat, internally illuminated sign faces
and for first surface applications to 3M™ Panaflex 945™ substrate.
PERFORMANCE LIFE – (UNPRINTED)
The exterior performance life of Gerber Series 230 is based upon field experience and exposure
tests conducted throughout the United States. When the graphics are processed and used
according to Gerber recommendations, they should have an expected performance life up to the
values shown in the charts below. The actual performance depends on the following conditions:
? Selection and preparation of substrate
? Application methods
? Exposure conditions
? Cleaning methods
Application Specifics
Performance Life
(years): Unprinted
U.S.1
S.W.2
*Vertical
Exposure
Series
230
Signs Only Unprinted, applied to first surface 6 5
*Face of graphic is vertical 90º ± 10º.
1. For exterior performance life statements outside of the United States, contact Gerber Technology.
2. The United States Desert Southwest area includes Arizona, New Mexico, and the desert areas of California, Nevada, Utah, and
Texas.
SHELF LIFE AND STORAGE
Apply film within one year of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without premask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at less than 100°F (38°C).
Use a paper interleaf between layers of stacked or rolled printed materials. Do not stack printed
graphics face to face.
PRINTING
Use Gerber Series 230 settings when printing with EDGE® Series thermal transfer printing
systems. Gerber standard tack application tape is required to be used as the transfer carrier for
all printed graphics.
Series 230 is compatible with GerberColor™ Process Pro™ (GCP), Spot (GCS), Transparent
(GCT), Medal (GCM), and Finishing (GCF) Series Foils.
Recommended working environment is as follows:
Page 3 of 5
? Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
? Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
? Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard? is a durable, dimensionally stable, glossy vinyl overlaminate. This film has
a petrochemical-resistant construction and is intended to be used when markings may
be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard? is a custom-formulated, 1-mil, clear, TEDLAR® polyvinyl fluoride
(PVF) laminating film designed to further expand the resistance to weathering of printed
graphics for up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant,
polyvinyl fluoride laminating film with a petrochemical-resistant adhesive system. It is designed
to further expand the resistance to weathering of printed graphics up to nine years. Gerber
UVGuard 9 has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety
of applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to
two years, and is especially beneficial where printed graphics experience severe handling
and forceful impact. Gerber StrikeGuard is not recommended in applications that
require petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard? SPF (Sign Protection Formula) is a clear, top-coat GerberColor
Finishing Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing
systems, to protect graphics from moderate contact and exposure to harmful effects of UV
rays. It has an expected performance life of up to five years (when printed by itself).
When applied as a protective overprint on other GerberColor Foils, Abrasion Guard SPF will
extend the life of the base color by up to 30%.
CUTTING
EDGE graphics printed on Series 230 can be cut on any 15-inch EDGE-compatible
sprocketed plotter. Non-printed graphics can be cut on friction cutters or the Gerber
ODYSSEY™.
Excess film should be weeded within 24 hours of cutting to minimize the effect of adhesive flow.
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water
and detergent. Do not use soaps or other cleaners with lotions or creams as they will
leave a residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
Page 4 of 5
If applying to glass, wipe the surface with a 2?to?1 mixture of water and isopropyl alcohol. Glass
temperatures can vary across the surface. These temperature variations can produce stresses,
which may cause the glass to break. Use caution when applying to glass.
Series 230 typically adheres to solar-grade polycarbonate substrates. However, some lots of his
substrate may inhibit the adhesion of this film. Polycarbonate substrates may require drying by
baking before use. Refer to the manufacturers’ instructions.
Many paint systems (e.g. two-part urethane) and some plastic substrates will outgas if they are
not fully cured. Out gassing can cause permanent bubbling in most films; substrates should be
tested for out gassing prior to final application. Plastics should be dried at 150ºF (66ºC) for 24
hours prior to application to help avoid out gassing.
APPLICATION TECHNIQUES
Both wet and dry application methods can be used with Series 230. Panels should be
overlapped by 0.0625 inch (1/16 inch). Gerber standard tack application tape is recommended
for all EDGE-printed applications.
CHANNEL LETTERS
When using Series 230 on rigid plastic channel letter faces, avoid contact with the adhesive
used to attach the trim cap edges. These adhesives attack Series 230 and cause curling, lifting
and premature failure of the film.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
PHYSICAL PROPERTIES
Property English Units Metric Units
Dimensional Stability 0.015 in 0.4 mm
Service temperature range -50? to 170?F -45? to 77?C
Tensile Strength 5 lb/in at 73?F 0.9 kg/cm at 23?C
Min. Application Temperature 60?F 16?C
CHEMICAL RESISTANCE
Series 230 Translucent Film is resistant to mild acids, mild alkalis and salts. Material has
excellent water resistance.
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gspinc.com to learn more about our many other foils, materials and equipment
Page 5 of 5
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, Comply, Controltac, EDGE Positive, EDGE READY, FloorMinders, Gerber AutoMag, GERBER EDGE FX, Gerber enVision, Gerber FastFacts,
Gerber Guard, Gerber HoloGraphix, Gerber ImageCal, Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM,
GerberStardust, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard, GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask,
GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx, ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, ODYSSEY, OMEGA, Process Pro,
SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
LEXAN is a Registered Trademark of General Electric Company.
Plexiglas is a Registered Trademark of Atoglas®, an Arkema company.
3M, Scotchcal, and Scotchbrand are Trademarks of the 3M Corporation.
TEDLAR is a registered trademark of DuPont.
©2017 Gerber Technology. All Right Reserved
Category: EDGE READY™ FastFact #: 3101 Supplied by: Aftermarkets Last Modified: 04/04/17Gerber 230 Translucent High Performance Film manufactured by 3M
Gerber 230 is a high performance 3 mil cast vinyl designed for use on internally illuminated signs, awnings and window graphics. It features uniform color with a surface finish that eliminates glare.
Five-year exterior life except Metallic Gold and Gold Nugget, which have a three-year exterior life.
Gerber 230 Product Bulletin 230 Translucent HP 15” Punched EDGE READY 30” Punched Color Code 10 Yard 50 Yard 10 Yard 50 Yard White 230-20P20921C P20922C P21948C P20992C
Ivory
230-005
P21028C
P21029C Light Beige 230-149P37721A P37707A P37693A P37679A
Silver
230-121
P43249A
P43250A
P43257A
P43258A Silver Gray 230-51P37714A P37700A P37686A P37672A
Shadow Gray
230-71
P37719A
P37705A
P37691A
P37677A Slate Gray 230-61P37716A P37702A P37688A P37674A
Black
230-22
P37708A
P37694A
P37680A
P37666A Rust Brown 230-63P20911C P20912C P21943C P20987C
Dark Brown
230-59
P20919C
P20920C
P21947C
P20991C Duranodic 230-69P20913C P20914C P21944C P20988C
Burgundy
230-49
P21026C
P21027C
P22297C
P22298C Raspberry 230-133P37710A P37696A P37682A P37668A
Mulberry
230-118
P51447A
P51461A
P51475A
P51489A Vivid Rose 230-78P37713A P37699A P37685A P37671A
Pink Lavender
230-108
P51444A
P51458A
P51472A
P51486A Cardinal Red 230-53P30810A P30811A P30822A P30823A
Dark Red
230-73
P20917C
P20918C
P21946C
P20990C Scarlet Red 230-83P51441A P51455A P51469A P51483A
Red
230-33
P20909C
P20910C
P21942C
P20986C Light Tomato Red 230-43P30808A P30809A P30820A P30821A
Poppy Red
230-143
P37711A
P37697A
P37683A
P37669A Orange 230-44P20907C P20908C P21941C P20985C
Tangerine
230-84
P37717A
P37703A
P37689A
P37675A Kumquat 230-74P37718A P37704A P37690A P37676A
Gold Nugget
230-141
P51451A
P51465A
P51479A
P51493A Metallic Gold 230-131P37712A P37698A P37684A P37670A
Sunflower
230-25
P30806A
P30807A
P30818A
P30819A Mango 230-125P51448A P51462A P51476A P51490A
Yellow
230-015
P20905C
P20906C
P21940C
P20984C Lemon Yellow 230-115P51445A P51459A P51473A P51487A
Emerald Green
230-126
P51449A
P51463A
P51477A
P51491A Holly Green 230-76P30814A P30815A P30826A P30827A
Green
230-26
P20903C
P20904C
P21939C
P20983C Bright Jade Green 230-116P51446A P51460A P51474A P51488A
Vivid Green
230-156
P37715A
P37701A
P37687A
P37673A Kelly Green 230-146P51452A P51466A P51480A P51494A
Apple Green
230-106
P51443A
P51457A
P51471A
P51485A Teal 230-246P43253A P43254A P43261A P43262A
Turquoise
230-236
P43251A
P43252A
P43259A
P43260A Dark Blue 230-36P21030C P21031C P22301C P22302C
Royal Blue
230-87
P20915C
P20916C
P21945C
P20989C Cobalt Blue 230-157P51454A P51468A P51482A P51496A
Delft Blue
230-97
P51442A
P51456A
P51470A
P51484A Blue 230-167P31344A P31345A P31346A P31347A
Intense Blue
230-127
P37709A
P37695A
P37681A
P37667A Process Blue 230-337P49908A P49909A P49910A P49911A
Deep Sky Blue
230-147
P51453A
P51467A
P51481A
P51495A Olympic Blue 230-57P30812A P30813A P30824A P30825A
Plum Purple
230-128
P51450A
P51464A
P51478A
P51492A