Gerber HoloGraphix Film Water Drop or New Rainbow

Description

Gerber HoloGraphix Film Water Drop or New Rainbow

HoloGraphix 15” Punched EDGE READY Color 10 Yard 50 Yard Water Drop P83222A P83223A New Rainbow P85124A P85125A

Holographic 3.6 mil film available in two patterns, Silver Sheen and Water Drop. Recommended for interior applications.

DESCRIPTION
Gerber HoloGraphix is a 3.7-mil, light-diffracting, metallized, vinyl film that has been coated with
a permanent, pressure-sensitive acrylic adhesive. Gerber HoloGraphix has been designed for
use with the GERBER EDGE®, GERBER EDGE 2®, and GERBER EDGE FX thermal
transfer printing systems, in conjunction with GerberColor Foils. The material can also be
used as a cut film and the clear adhesive system allows for reverse-cut applications.
Patterns available are Mosaic, Silver Sheen, Kaleidoscope, and Water Drop.
INTENDED APPLICATIONS
The patterns of Gerber HoloGraphix are ideally suited for interior applications requiring
attractive, light-diffracting labels with a metallic luster. Potential uses include novelty decals,
point-of-purchase displays, and ad specialty items.
The individual holographic patterns repeat in the machine and transverse directions. Seams will
therefore be evident at varying points on the vinyl.
This film is not recommended for use on corrugated or highly irregular surfaces. It is also not
intended for applications where petrochemical contact may occur. If petrochemical exposure is
anticipated, refer to the section below on protecting graphics. The user should determine the
suitability of all substrates prior to application.
SHELF LIFE AND STORAGE
Apply film within one year of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without premask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at less than 70F (21°C) and 50%
relative humidity.
Page 2 of 4
Use a paper interleaf between printed materials that are rolled or stacked. Do not store printed
graphics face to face.
PRINTING
If your software material selection palette does not have Gerber HoloGraphix, use 3M
Scotchcal™ Series 220 or Gerber HP Series 220 normal print settings.
GerberColor Spot (GCS), GerberColor Process Pro CMYK (GCP), GerberColor Medal (GCM),
and GerberColor Transparent (GCT) Series Foils can be used to print onto Gerber HoloGraphix.
(Refer to Product Bulletins of specific foils and materials for printing recommendations.)
Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard is a custom-formulated, 1-mil, clear, extremely durable polyvinyl fluoride
(PVF) laminating film designed to further expand the resistance to weathering of printed
graphics for up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
CUTTING
Gerber HoloGraphix can be cut on any Gerber EDGE-compatible sprocket plotter. A 30°
SuperSharp blade is recommended. Plotters can be set to full speed.
A test cut should be performed to determine the proper tool force setting.
Page 3 of 4
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
If applying to glass, solvent wipe the surface with a 2 to 1 mixture of water and isopropyl
alcohol. Glass temperatures can vary across the surface. These temperature variations can
produce stresses which may cause the glass to break. Use caution when applying to glass.
Some polycarbonate substrates may weaken when certain vinyl films are applied to them.
Because of this possibility, the user will need to determine if safety items such as helmets,
safety shields, and some windshields are compatible with their vinyl’s adhesive.
Many paint systems (e.g. two-part urethane) and some polycarbonate substrates will outgas if
they are not fully cured. Outgassing can cause permanent bubbling in most films; substrates
should be tested for outgassing prior to final application.
APPLICATION TECHNIQUES
Dry application methods should be used with Gerber HoloGraphix and panels can be butted or
overlapped. The minimum recommended application temperature is 50F (10C).
Extended exposure to U.V. light may cause the film pattern to distort or fade.
Gerber standard tack application tape is required for all EDGE-printed graphics. Printed
graphics should be allowed to cure for 15 minutes prior to application of transfer tape.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives
PHYSICAL PROPERTIES
Thickness 3.6 to 3.7 mil with adhesive
Film Color Metallized holographic patterns
Adhesive Acrylic
Adhesive Color Clear
Liner Poly coated, layflat
Application Temp 50F (10C)
Operating Temperature -40F to 176F (-40C to 80C)
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
Page 4 of 4
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gspinc.com to learn more about our many other foils, material
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
3M is a trademark of 3M Company.
©2018 Gerber Technology. All Right Reserved
Category: EDGE READY™ FastFact #: 5548 Supplied by: Aftermarkets Last Modified: 02/27/18