Gerber ImageCal “R” Removable Film white or clear

Description

Gerber ImageCal “R” Removable Film

ImageCal R 15” Punched EDGE READY Color 10 Yard 50 Yard White P72778A P72779A Clear P65587A P65588A

Gerber ImageCal “R” is a removable vinyl designed for use with Gerber EDGE Systems and GerberColor Foils. Gerber ImageCal “R” is available in two formats that have slightly different characteristics.
Gerber ImageCal “R” Clear is a 3.5 mil, durable, removable, calendered vinyl. For up to six months after application, the film’s unique adhesive allows the graphic to be removed from most surfaces with little or no residue left behind and without the aid of chemicals or accessories.
Gerber ImageCal “R” White is a 4 mil removable vinyl which can be reused up to 5 times within one year without leaving residue or losing the strength of its adhesive bond.

DESCRIPTION
Gerber ImageCal “R” is a removable vinyl designed for use with the GERBER EDGE®,
GERBER EDGE 2®, and GERBER EDGE FX thermal transfer printing systems, in
conjunction with GerberColor Foils. Gerber ImageCal “R” is available in two formats:
ImageCal “R” Clear and ImageCal “R” White, which have slightly different characteristics.
Gerber ImageCal “R” Clear is a 3.5-mil, durable, removable, calendered vinyl. For up to six
months after application, the film’s unique adhesive allows the graphic to be removed from most
surfaces with little or no residue left behind and without the aid of chemicals or accessories.
Gerber ImageCal “R” White is a 4-mil removable and reusable vinyl which can be reused up to
five times within one year without leaving residue or losing the strength of its adhesive bond.
INTENDED APPLICATIONS
Gerber ImageCal “R” is ideally suited for interior and short-term exterior emblems, promotional
graphics, signs, second-surface applications, point-of-purchase, and window displays. The user
should determine the suitability of all substrates prior to actual application.
This film is not recommended for use on corrugated or highly irregular surfaces. It is also not
intended for applications where petrochemical contact may occur. If petrochemical exposure is
anticipated, refer to the section below on protecting graphics.
PERFORMANCE LIFE (UNPRINTED)
When applied vertically, Gerber ImageCal “R” White has an expected performance life of up to
one year. Gerber ImageCal “R” Clear has an expected performance life of up to six months.
Page 2 of 5
Performance statements are based upon field experience and exposure tests conducted
throughout the United States. Substrate selection, exposure angle, environmental conditions,
and maintenance of markings will affect actual performance. Continuous exposure in regions
that experience maximum sunny days will result in decreased performance. This product is not
recommended for horizontal applications.
SHELF LIFE AND STORAGE
Apply film within one year of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without premask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at less than 70F (21C) and 50%
relative humidity.
Use a paper interleaf between layers of stacked or rolled printed materials. Do not stack printed
graphics face to face.
To store graphics that are to be removed and reused, place the graphics back on the original
liner material type. The liner should be kept in a clean dust-free, moisture-free environment (i.e.
sealed plastic bag). Reapply mask if necessary for re-application. As usual, use a paper
interleaf between layers of stacked printed materials. Do not stack printed graphics face to face.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
PRINTING
If your software material selection palette does not have Gerber ImageCal “R” Removable Vinyl,
use Gerber HP Series 220 normal print settings.
GerberColor Finishing (GCF), GerberColor Spot (GCS), GerberColor Process Pro™ CMYK
(GCP), GerberColor Medal (GCM), and GerberColor Transparent (GCT) Series Foils can be
used to print onto ImageCal “R” Removable Vinyl.
Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard is a custom-formulated, 1-mil, clear, extremely durable polyvinyl fluoride
(PVF) laminating film designed to further expand the resistance to weathering of printed
graphics for up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
Page 3 of 5
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
CUTTING
Gerber ImageCal “R” Removable Vinyl can be cut on any 15-inch EDGE-compatible sprocketed
plotter. A 30° SuperSharp blade is recommended. Plotters can be set to full speed.
A test cut should be performed to determine the ideal tool force setting.
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
If applying to glass, wipe the surface with a 2 to 1 mixture of water and isopropyl alcohol. Glass
temperatures can vary across the surface. These temperature variations can produce stresses
which may cause the glass to break. Use caution when applying any pressure to glass.
Some polycarbonate substrates may weaken when certain vinyl films are applied to them.
Because of this possibility, the user will need to determine if safety items such as helmets,
safety shields, and some windshields are compatible with their vinyl.
APPLICATION TECHNIQUES
Dry application methods should be used with Gerber ImageCal “R” Removable Vinyl and panels
should be overlapped.
Gerber standard tack application tape is required for all graphics produced with Gerber Digital
Printing Systems.
A “snap tape test” should be used to determine the removal effects of ImageCal “R” Removable
Vinyl on painted surfaces. Using a razor or other sharp instrument, cut a crosshatch pattern
through the paint (Cut should be made in an inconspicuous area). The crosshatch pattern
should be one inch wide with spacing of approximately 1/5 inch (5.08 mm) between cut lines.
Using a squeegee, firmly apply a strip of high tack pressure sensitive tape over the crosshatch
pattern. (Use Scotch Tape #610 or equivalent.) Remove tape at 180° angle using a firm,
rapid pull. Any sign of lifting, peeling, or bubbling of the paint indicates poor paint adhesion.
This could result in damage to the substrate when graphic removal is attempted.
Page 4 of 5
PHYSICAL PROPERTIES
Thickness 3.5 to 5 mil (with adhesive)
Film Color Clear or White
Adhesive Removable
Adhesive Color Clear
Liner 90-lb stayflat
Dimensional Stability Fair
Minimum Application Temp. 35F (2C)
Operating Temperature 20°F to 176F (-29C to 80C)
CHEMICAL RESISTANCE (UNPRINTED)
Chemical Agent Exposure Time Result
Water 24 hours Slight adhesion loss on glass
50/50 Ethylene glycol/water 24 hours Slight adhesion loss on glass
Reference fuel 1 hour Slight adhesion loss on glass
SAE 20 motor oil 24 hours No effect
#1 diesel fuel 1 hour Slight adhesion loss on glass
10% Hydrochloric acid 10 minutes No effect
10% Ammonium Hydroxide 10 minutes No effect
Mineral spirits 10 minutes No effect
VM & P Naphtha 10 minutes Slight adhesion loss on glass
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
Contact Information
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and
equipment.
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
Page 5 of 5
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
LEXAN is a Registered Trademark of General Electric Company.
3M is a trademark of 3M Company.
enVision is a trademark of 3M Company that is licensed to Gerber.
©2018 Gerber Technology. All Right Reserved
Category: EDGE READY™ FastFact #: 5547 Supplied by: Aftermarkets Last Modified: 02/27/18