Description
Gerber ImagePerfect 2595R9 FloorMinder Textured non-slip vinyl
IP 2595R9 54” Unpunched Color 25 Meter 27.3 Yard White P85084A
8.0mil Textured non-slip vinyl with a solvent based semi- permanent adhesive that is engineered for use in short- term, printable indoor floor graphic installations. Specially created for digital printing on large-format inket printers and is suitable for printing with eco solvent and solvent inks as well as UV-cured and latex inks.
Page 1 of 2
Gerber FloorMinder IP2595R9
DESCRIPTION
ImagePerfect™ 2595R9 FloorMinder is a white textured vinyl with a non-slip surface and a semipermanent adhesive that is engineered for use in short-term, indoor floor graphic installations. It
has been specially created for digital printing on large-format inkjet printers and is suitable for
printing with eco solvent and solvent inks as well as UV-cured and latex inks.
ImagePerfect™ 2595R9 FloorMinder has been specifically engineered for use as a short-term, printable
floor graphic product. It can be used on any kind of smooth indoor floor surface for installations such as
promotional advertising, point-of-sale and point-of-purchase promotions, temporary wayfinding graphics
and public information displays. As such, it will be used in indoor installations at retail locations, trade
shows, exhibitions, airports, museums, art galleries, sports arenas, hotels, etc. It delivers high levels of
print quality with a large color gamut that ensures colorful images with vibrant area in-fills. The adhesive
system should allow for quick and clean removability, leaving no adhesive residue on the substrate after
removal of the product. The product does not require the use of an additional laminate, delivering
inherent scuff-resistance and a non-slip surface (R9).
Attention: It is strongly recommended for the product to lay flat during the drying process. In order to
avoid potential lifting of the product, we would recommend that corners are rounded rather than cut to a
sharp 90° angle. Surface preparation: In order to achieve process-secure application, it is essential that
the substrate is totally dry and completely free of dust, dirt and debris before the product is installed. As
such, we would recommend that the substrate is brushed and vacuumed before the IP FloorMinder is
applied and, if the substrate is wet, we would recommend that it should be dried via portable heating,
again before the product is installed. For application, the substrate should have a surface temperature of
no less than 50°F.
SPECIFICATIONS
Property Description
Film Indoor floor graphics
Film Color White, Matte
Thickness 8mil
Adhesive Acrylic, semi-permanent, grey
Liner PE-coated silicone paper
Temperature range -22°F to +194°F (-30°C to +90°C)
Durability 3 months (depending on the application)
Flame Retardancy B-s1, d0
Shelf life 12 months, 68°F (20°C) /50% humidity
Page 2 of 2
Technical specifications are subject to change without prior notice. Output may vary depending on the type of print data/file, application, media,
environmental conditions, print speed or other variables. The specifications and information on physical and chemical characteristics is based
upon testing believed to be reliable. They are intended only as a source of information and are given without guarantee and do not constitute a
warranty. Purchasers should independently determine, prior to use, the suitability of this material for its specific use.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber Customer
Service at 1-800-222-7446 or (860)871-8082. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and equipment.
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
Gerber Scientific Products is a Registered Trademark of Gerber Technology.
ImagePerfect is a Trademark of Spandex.
©2020 Gerber Technology. All Right Reserved
Category: Large Format FastFact #: NA Supplied by: Aftermarkets Last Modified: 10/30/20