Gerber LexEdge outdoor Matte 10 Mil

Description

Gerber LexEdge outdoor Matte 10 Mil

LexEdge Outdoor 15” Punched EDGE READY Color 10 Yard 50 Yard Matte P72790A P72791A

Outdoor durable, this semi-rigid, matte, 10-mil Lexan has a custom-formulated print surface specifically designed to resist tearing, abrasion and yellowing effects of UV exposure. Formulated for use with the Gerber EDGE for printing directly onto the final substrate in second surface applications. Ideally suited for the production of ATM/bank, equipment labels, gas station graphics, menu boards and other outdoor graphic displays. Vertical exterior performance life of 3 to 5 years.

DESCRIPTION
Gerber Outdoor LexEdge is a custom-formulated, 10-mil, LEXAN-based polycarbonate
(LEXAN HPW-12) designed for use with GERBER EDGE®, GERBER EDGE 2®, and GERBER
EDGE FX thermal transfer printing systems, in conjunction with GerberColor™ Foils.
Outdoor LexEdge is dimensionally stable and resists tearing, abrasion, heat, and yellowing.
Outdoor LexEdge is ideally suited for the production of outdoor applications such as ATM
displays, equipment labels, gas station graphics, menu boards, and other outdoor signage
applications.
PERFORMANCE LIFE
Outdoor LexEdge has an expected durability of up to five years when applied vertically.
Performance life varies based upon foil use and exposure angle.
Performance statements are based upon field experience and exposure tests conducted
throughout the United States. Substrate selection, exposure angle, environmental conditions,
and maintenance of markings will affect actual performance. Continuous exposure in regions
that experience maximum sunlight will result in decreased performance. This product is not
recommended for horizontal applications.
PRINTING
A tension roll holder should be used with Outdoor LexEdge.
Fine particles may be attracted to the surface of this material. If this occurs, Outdoor LexEdge
can be cleaned with distilled water and a lint-free cloth. Allow the material to dry completely
before printing. Do not use an alcohol or solvent-based cleaner on this product, as they will
cause the surface to haze and become unprintable.
Page 2 of 4
Outdoor LexEdge is masked on the PRINT SIDE ONLY to protect its surface. The print
side of the material is coated for thermal transfer printing while the reverse is hard coated for
scratch and abrasion resistance. The print side mask must be removed before printing.
The matte side of this material will generally be the viewing side. Since the polished print
surface is the opposite side and will most often be used in second-surface applications, reverseprint design procedures will need to be followed. Outdoor LexEdge is shipped with the polished
print surface rolled out.
When printing on Outdoor LexEdge, a specific color of foil will often be used as a solid
backing color. This color will generally be assigned as an overprint. In order to ensure
that this color covers the other printed graphics as completely as possible, it may be
necessary to modify its print settings. (This will be especially needed when the backing
foil will be printed on top of more than two other colors.) The print settings for the
backing foil can be changed in the QuickPlot screen. Go into the “Print Order” screen
(F11) and select SETTINGS. Click on “DARK” in the overprint side only.
GerberColor Spot (GCS), GerberColor Process Pro (GCP), and GerberColor Transparent
(GCT) Series Foils can be used to print onto Outdoor LexEdge.
Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
CUTTING
Outdoor LexEdge should be score cut on any 15-inch EDGE-compatible sprocketed plotter. A
45° SuperSharp blade is recommended. Plotters should be set at 50% speed. Outdoor
LexEdge is not recommended for cutting very small shapes, such as circles less than 0.5 inch in
diameter.
The ideal cut will penetrate halfway through the material. To punch out your finished pieces,
find a straight cutline and fold the material backwards. Pinch the cutline with your fingers, and
the material will break. Slowly remove the finished piece one edge at a time. The user should
perform a test cut to determine tool force setting.
If using a plotter with a swivel blade, you will be able to cut simple shapes easily. However,
when cutting complex shapes, your ability to maintain an accurate and consistent cut depth may
be compromised.
Cutting weed borders on Outdoor LexEdge is not generally recommended or necessary.
SHELF LIFE AND STORAGE
Store Outdoor LexEdge in the plastic bag provided in the original shipping box. Printed or
unprinted Outdoor LexEdge should not be stored on a roll that has less than a 3-inch inside
diameter.
Use a paper interleaf between printed materials that are rolled or stacked. Do not store printed
graphics face to face. Outdoor LexEdge should be stored in a clean area free from excessive
moisture and sunlight. An ambient temperature below 100F (38C) is recommended.
Unprinted Outdoor LexEdge can be stored for one year at 70F (21C) and 50% relative
humidity.
Page 3 of 4
CAUTION: Polycarbonate film is commonly used in conjunction with sensitive electronic devices
either as a label, window or membrane switch overlay. These devices or components of the
same are often packaged in anti-static materials to protect the electronics against damage
caused by electrostatic discharge (ESD). One type of anti-static packaging material is
commonly referred to as Pink Poly. It is a clear pink (hot pink) polyethylene that is available as
a film for bags, bubble pack or foam. It is treated with an amine type compound that imparts the
anti-static qualities. This compound works by blooming to the surface of the polyethylene and
together with airborne moisture produces ions that increases the electrical conductivity at the
surface of the polyethylene. All amines are chemically aggressive to polycarbonate. A
polycarbonate part that comes in contact with amines will eventually degrade. The degradation
shows up as a surface haze or clouding, stress cracking of formed parts, complete ink
delamination or -in the advanced stages- de-polymerization of the polycarbonate. Pink Poly
should not be used in close proximity to any polycarbonate product including hardcoated polycarbonate film. Anti-static packaging materials that are safe to use are those that
are made conductive by using a metallized coating or inert conductive filler.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
PHYSICAL PROPERTIES
Thickness 10 mil
Film Color Matte/Polished Clear
Adhesive N/A
Liner N/A
Dimensional Stability Excellent
Operating Temperature -150ºF (-101ºC) to 275ºF (135ºC)
CHEMICAL RESISTANCE (UNPRINTED)
Chemical Agent Result
Mild Acids No Effect
Alcohols Hazing
Alkalis No effect at low concentration and below 85ºF (29ºC).
Higher concentrations and temperatures result in physical
decomposition.
Aliphatic Hydrocarbons No effect
Amines Crystallization
Aromatic Hydrocarbons Severe stress cracking
Detergents and sprays Mild soap solutions have no effect; strongly alkaline
materials should be avoided.
Page 4 of 4
Chemical Agent Result
Esters Crystallization
Gasoline No Effect
Fruit juices/soft drinks End user test recommended
Household cleansers No Effect
Ketones Crystallization/stress cracking, delamination
Silicone oils/greases No Effect up to 85ºF (29ºC)
Toluene No Effect
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and
equipment.
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
LEXAN is a Registered Trademark of General Electric Company.
3M is a trademark of 3M Company.
©2018 Gerber Technology. All Right Reserved
Category: EDGE READY™ FastFact #: 5575 Supplied by: Aftermarkets Last Modified: 02/27/18