Gerber Reflective Sheeting 280-76 Light Blue

Description

Gerber Reflective Sheeting 280-76 Light Blue

Light Blue 280-76P39822A P39823A P39820A P39821A

280 Reflective 15” Punched EDGE READY 30” Punched

Gerber 280 is a 7.5 mil reflective sheeting designed for markings requiring high visibility, both day and night. The material has good flexibility and provides excellent conformance to flat or moderately curved substrates. Seven-year exterior life on all colors; five-year exterior life on black.

DESCRIPTION
Gerber HP Series 280 is a high performance reflective film made exclusively for Gerber by
3M™. Series 280 is a durable, dimensionally stable film with a clear, pressure-sensitive
adhesive designed to withstand a variety of severe weather and handling conditions. This
reflective film is designed for markings requiring high visibility, both day and night, and has good
flexibility, providing excellent conformance to flat or moderately curved substrates. It is available
in gold, black, ruby red, red, orange, lemon yellow, yellow, green, light blue, and blue, all which
come on a 94-lb poly-coated liner.
PRODUCT CONSTRUCTION
Property Description
Thickness (film and adhesive) 7 to 8 mils (0.18 to 0.20 mm)
Film color Gold, black, ruby red, red, orange, lemon yellow,
yellow, green, light blue, and blue
Adhesive Clear, pressure sensitive
Liner 94-lb, polyethylene-coated paper
Page 2 of 6
Property Description
Application substrates For flat surfaces with or without rivets, or moderate
curved surfaces
Application surfaces Flexible signage, glass, metal, acrylic,
polycarbonates, fiberglass, painted surfaces
Removability Removable with heat and/or chemicals from most
substrates within specified warranty period
INTENDED APPLICATIONS
Series 280 is suitable for a wide range of commercial and industrial applications including
vehicles, exterior and interior signage, window markings, etc. It can be used on flat surfaces
with or without rivets, or moderate curved surfaces.
PERFORMANCE LIFE – (UNPRINTED)
The exterior performance life of Series 280 is based upon field experience and exposure tests
conducted throughout the United States. When the graphics are processed and used according
to Gerber recommendations, they should have expected a performance life up to the values
shown in the charts below. The actual performance depends on the following conditions:
 Selection and preparation of substrate
 Application methods
 Exposure conditions
 Cleaning methods
Application Specifics
Performance Life
(years): Unprinted
U.S. 1 Desert SW 2
Vertical
Exposure
Series
280
Signs Only Unprinted, applied to first surface 5 *(black = 4) 3 *(black = 2)
Vehicles Only Unprinted, applied to first surface 7 *(black = 5) 5 *(black = 4)
* Face of graphic is vertical 90º ± 10º.
**Black film performance life is slightly less for each category than that of all other colors.
1 For exterior performance life statements outside of the United States, contact Gerber Technology.
2. The United States Desert Southwest area includes Arizona, New Mexico, and the desert areas of California, Nevada, Utah, and
Texas.
SHELF LIFE AND STORAGE
Apply film within two years of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without pre-mask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at less than 100 °F (38 °C).
Use a paper interleaf between layers of stacked or rolled printed materials. Do not stack
printed graphics face to face.
Page 3 of 6
PRINTING
Series 280 can be used with GerberColor Finishing (GCF), GerberColor Spot (GCS),
GerberColor Process Pro™ CMYK (GCP), and GerberColor Transparent (GCT) Series Foils.
GerberColor Process and Transparent Foils are especially ideal for use with Series 280
because the transparent characteristic of these foils allows the retroreflectivity of the film
to show through.
Gerber standard tack application tape is required to be used as the transfer carrier for all printed
graphics.
Before printing on any color of 280 reflective film with your GERBER EDGE, please make sure
you have the correct “280i Plus” print settings in your OMEGA software as referenced below.
You will poor print results if you use “280i” settings.
 If you own OMEGA 4.0 or higher, you can download the new settings at no charge on
our website:
http://www.gspinc.com/service/software-downloads
Click on the download file link at the top of that page labeled “Material Settings Update
April 2017 for OMEGA 4.0 or higher EDGE FX Firefile.”
 If you own an earlier version of OMEGA, substitute with 220 settings.
Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard is a durable, dimensionally stable, glossy vinyl overlaminate. This film has a
petrochemical-resistant construction and is intended to be used when markings may be
exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard is a custom-formulated, 1-mil, clear, TEDLAR® polyvinyl fluoride (PVF)
laminating film designed to further expand the resistance to weathering of printed graphics for
up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
Page 4 of 6
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
CUTTING
Series 280 can be cut on any 15-inch EDGE-compatible plotter using a 30° blade. When using a
GS15 plus™ plotter, a 45° tangential blade is recommended. See FF# 5252.
Excess film should be weeded within 24 hours of cutting to minimize the effect of adhesive flow.
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to dry completely.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
If applying to glass, wipe the surface with a 2to1 mixture of water and isopropyl alcohol. Glass
temperatures can vary across the surface. These temperature variations can produce stresses,
which may cause the glass to break. Use caution when applying to glass.
Some polycarbonate substrates may weaken when certain vinyl films are applied to them.
Because of this possibility, the user needs to determine if safety items such as helmets, safety
shields, and some windshields are compatible with their vinyl’s adhesive.
Many paint systems (e.g. two-part urethane) and some plastic substrates will outgas if they are
not fully cured. Outgassing can cause permanent bubbling in most films; substrates should be
tested for outgassing prior to final application. Plastics should be dried at 150 ºF (66 ºC) for 24
hours prior to application to help avoid outgassing.
APPLICATION TECHNIQUES
Only dry application method should be used with Series 280 and panels should be overlapped
by 0.1 inch. Gerber standard tack application tape is recommended for all EDGE-printed
applications.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives. Automated vehicle washing
systems that use rotary cleaning brushes should also be avoided.
PHYSICAL PROPERTIES
Property English Units Metric Units
Dimensional Stability 0.015 in 0.4 mm
Service temperature range -30F to 200F -34C to 93C
Tensile Strength 11 lb/in at 73F 2.0 kg/cm at 23C
Minimum Application 55F (flat w/o rivets) 13C (flat w/o rivets)
Page 5 of 6
Temperature 60F (flat w/ rivets) 16C (flat w/ rivets)
ADHESION CHARACTERISTICS (24 HOURS AFTER APPLICATION)
Substrate English Units Metric Units
Aluminum 4.8 lb/in 0.86 kg/cm
FRP 3.7 lb/in 0.7kg/cm
Painted aluminum panels 2.6 lb/in 0.5 kg/cm
RETRO REFLECTION
At a -4 entrance angle and a 0.2 observation angle, unprinted film Series 280 has the
following typical coefficient of retro reflection. It is expressed in candlepower per foot-candle per
square foot (candela/lux/square meter) per ASTME 810.
The entrance angle is formed by a light beam striking the surface at a point and at a line that is
perpendicular to the surface at the same point.
An observation angle is formed by the light beam striking the reflective surface and returning to
the observer. From 800 feet (249 meters), a motorist normally views a graphic at a 0.2 angle.
Note: Retains 90% of its retroreflectivity when totally wet.
Color Typical Coefficient of
Retroreflection
Gold 65
Black (reflects white) 30
Ruby Red 20
Red 20
Orange 25
Lemon Yellow 40
Yellow 60
Green 15
Light Blue 10
Blue 10
CHEMICAL RESISTANCE (UNPRINTED)
Series 280 Reflective film is resistant to mild acids, mild alkalis and salts. Material has excellent
water resistance and retains 90% of its retroreflectivity when totally wet.
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and
equipment.
Page 6 of 6
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
3M is a trademark of 3M Company.
©2018 Gerber Technology. All Right Reserved
Category: EDGE READY™ Supplied by: Aftermarkets Last Modified: 02/27/18