GerberColor Special Effects Foils EDGE 1 & 2 P69940A Fluor. Red Orange GCX-414

Description

GerberColor Special Effects Foils EDGE 1 & 2 P69940A Fluor. Red Orange GCX-414

GerberColor™ Special Effects Series (GCX)
Fluorescent Foils
DESCRIPTION
GerberColor Special Effects Series (GCX) Fluorescent Foils are durable, dimensionally stable,
resin-based, pigmented foils designed for use with the GERBER EDGE®, GERBER EDGE 2®,
and GERBER EDGE FX thermal transfer printing systems, in conjunction with EDGE
READY™ materials.
Color Name Pigment Code
Green GCX – 416
Red – Orange GCX – 414
Yellow GCX – 415
INTENDED APPLICATIONS
GCX Fluorescent Foils are intended for use in the production of interior graphics, point-ofpurchase displays, warning graphics, or any interior graphics requiring high visibility even in lowlight conditions. In addition, GCX Foils can be used for reverse-print, interior second-surface
applications. (In reverse-print applications, GCX Foils can be backed with an appropriate GCS,
GCT, or GCP Foil.)
Most materials that GCX Foils would be printed on are not intended for use where they may be
exposed to petrochemical spillage. If petrochemical contact is anticipated, refer to the
PROTECTING GRAPHICS section below. The user should determine the suitability of all
substrates.
Page 2 of 4
PERFORMANCE LIFE
GCX Foils are intended for interior use only. Graphics printed with GCX Foils should be applied
out of direct sunlight.
SHELF LIFE AND STORAGE
GerberColor Foils, film, and printed graphics (with or without premask) should be kept in a clean
area free from excessive moisture and direct sunlight. Store foils at 40ºF to 90ºF (4ºC to 32ºC)
and 40% to 60% humidity. When not in use, cartridges should be kept in their package sleeves.
PRINTING
Small text or shapes (less than 20 point) should not be printed with GCX Foils. Halftone blends
and fades are not recommended applications for GCX Foils.
Lot to lot variations can produce slight visual differences in color output.
Recommended working environment is as follows:
• Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
• Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
• Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
If your software foil selection palette does not include GCX Foils, select a corresponding
GerberColor Spot Foil. GCX Foils are compatible with the following EDGE READY materials:
Gerber HP Series 220 and 225 manufactured by 3M, Gerber Series 210, Floor Graphics from
Gerber, LexEdge™ II, Gerber Vision™ manufactured by 3M, Gerber InstaChange™
manufactured by 3M, Gerber QUANTUM™ Marking Film Series 2000 and 4000, Gerber
AutoMag™ II, GerberMag™ II, Gerber Static Cling, Gerber ImageCast™ manufactured by 3M,
Gerber ImageCal™ “P”, Gerber ImageCal “R”, Gerber PlastiGraphix™ PVC- 10, and
GerberGlow™.
Due to differences in the pigment coating for these colors, GCX Foils are not recommended for
creating GerberColor Spectratone™ matches. Foils within the GCX Fluorescent family are
compatible with each other and can be combined as overprints to produce other fluorescent
colors. Overprint appearance may vary.
GCX Foils are also compatible as the underlayer in overprint combinations with the following
GerberColor Series: GerberColor Spot (GCS), GerberColor Process Pro™ CMYK (GCP),
GerberColor Transparent (GCT), and GerberColor Finishing (GCF).
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard™ is a custom-formulated, 1-mil, clear, TEDLAR polyvinyl fluoride (PVF)
laminating film designed to further expand the resistance to weathering of printed graphics up to
five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
Page 3 of 4
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of five years (when printed by itself). When applied as a protective
overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the base color
by up to 30%.
Matte Clear is a clear matte finish, top coat GerberColor Foil designed for use with EDGE®
Series thermal transfer printing systems, to reduce glare and protect graphics from moderate
contact or handling. It has an expected performance life of three years.
APPLICATION TECHNIQUES
Gerber standard tack application tape is required for all EDGE-printed graphics. Printed
graphics should be allowed to cure for 15 minutes prior to the application of transfer tape.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
PHYSICAL PROPERTIES
Foils
Pigment Resin Based
Color Coat 3.5 to 4.1 microns
Liner Thickness 5.7 microns
Foil Length – minimum 27.34 yards (25 meters)
Cartridge
Cores Polystyrene
End Shell ABS Plastic
End Plugs ABS Plastic
Side Rails ABS Plastic
Cartridge Weight 1 lb 12 oz
Page 4 of 4
CHEMICAL RESISTANCE (Printed on Gerber High Performance Series 220)
Chemical Agent Exposure Time Results
Water 24 Hours No Effect
SAE 20 Motor Oil 24 Hours No Effect
50/50 Ethylene Glycol/Water 24 Hours No Effect
10% Hydrochloric Acid 10 Minutes No Effect
10% Ammonium Hydroxide 10 Minutes No Effect
Mineral Spirits 10 Minutes No Effect
Dish Detergent/Water 24 Hours No Effect
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gspinc.com to learn more about our many other foils, materials and equipment.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, GerberStardust, Gerber StrikeGuard, Gerber Tone,
Gerber UVGuard, GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot,
GSxplus, GSx, ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, ODYSSEY, OMEGA, Process Pro, SpectraShade, and SpectraTint are
Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
3M is a trademark of 3M Company.
TEDLAR is a registered trademark of DuPont.
©2015 Gerber Technology. All Right Reserved
Category: GerberColor Foils FastFact #: 5569 Supplied by: Aftermarkets Last Modified: 01/30/2020