Description
Glass Adhere Luster Window Film
Glass Adhere Luster Window Film
Peel and Place Media with Micro Adhesion Suction Technology.
•Available white or clear.
• 8 mil material, no adhesive.
• Adheres to glass, Plexiglass, Formica, Coroplast™, vehicles and metals.
• Removable and reusable.
• Water resistant and wipeable, even with glass cleaners.
• For best results clean surface with hot water and dry with a non-fraying cloth.
• Kiss-Cut and contour cut capable.
• Great for outdoor window signs, in-store cooler doors, and more.
• Print compatibility: Solvent, Eco-Solvent and UV.
GlassAdhere – Installation Suggestions
Clean surface with hot water (no cleaning agents) and dry with a non-fraying cloth.
Do not bend or crease the material because it will induce tunneling/bubbles which
may remain after squeegeeing.
Use a good amount of plain water sprayed on the glass surface or material for wet
install. This helps preventing bubbles.
Use a RUBBER squeegee (as to not scratch the material) and a fair amount of force to push the
air bubbles out. Start from the 3” Down and press hard downward and 3” down and
press upward. Work out any leftover bubbles accordingly from inside the material
out to the edges.
Always wipe from the material from inside out. Re: if you come in from the glass
towards the material you may catch the edges.
Upon removal do not bend back the corners. This may create a crease or bend. It will
be difficult to get the corners to re-stick. You can try re-bending it in the opposite
direction to flatten.
color ,white ,clear, frost rvse
