HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat Extender Kit (TAA Compliant)

Description

HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat Extender Kit (TAA Compliant)
Complete solution for extending HDMI, VGA and Stereo Audio signals up to 230 feet over a single Cat5e, Cat6, or Cat6a network patch cable using HDBaseT technology
5.0
 | 
1 Review

Product # :
29218
Description Features Certifications Specs Contents Support
Product Features
• Perfect for extending audio/video signals from a Blu-ray™ player and a laptop to a projector
• Three methods for input switching: Auto, Manual, and Serial RS232
• TruChoice™ power allows for power at the transmitter or receiver end
• Compatible with any HDBaseT receiver from C2G
• Utilizes a single Cat5e, Cat6 or Cat6a cable for extension
• Designed for easy connections in a wall box
• Kit includes both the transmitter and receiver units
Product Description
The HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat Extender Kit is a complete solution for extending audio/video signals from a Blu-ray™ player and a laptop to the HDMI input of a projector. This kit extends HDMI, VGA and Stereo Audio signals over a single Cat5e, Cat6, or Cat6a network patch cable up to 230 feet at a 1080p resolution. The rear cable connections for the Cat cable and the optional serial cable are set at 90°, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device, like our TruLink® A/V Controller This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

Note: Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable or an HDBaseT Certified Cat6a Patch Cable.

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
HDMI® and VGA + Stereo Audio HDBaseT over Cat Extender Transmitter to Receiver Kit
$891.99
2×2 Drop in Ceiling Speaker – 8? – Plenum Rated
$142.99
20-pin Female IDC Flat Ribbon Connector
$0.99
1m LC-ST 50/125 OM2 Duplex Multimode Fiber Optic Cable – Plenum CMP-Rated – Orange
$35.99
2-Port A/V Controller
$295.99
14ft Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable (TAA Compliant) – Black
$7.99
1ft Select VGA + 3.5mm Stereo Audio A/V Cable M/M – In-Wall CMG-Rated
$16.99
Product Certifications
Product Specifications
Color : Black
UPC : 757120292180
Warranty : 3 Years
Vendor : C2G
Weight : 3.413 LB
Electrical Specifications

• Maximum Distance Supported: 230ft (70m) at 1920 x 1080
• Maximum Distance Supported: 115ft (35m) at 3840 x 2160
• Maximum Resolution Supported: 3840 x 2160 (UHD—HDMI), 1920 x 1200 (VGA)
• Supports: HDCP, HDBaseT, Serial Control

Power Adapter

• Input Voltage: 100-240 VAC, 50~60HZ
• Output Voltage/Amperage: 0.6A, 18VDC, 1.0A
• Cable Length: 1530±100mm
• Plug Diameter: 4.75mm, ID=1.7mm
• Center Pin Polarity: Positive

Physical Specifications

• Operating Temperature: 0~40°C; 0-80%RH (Non-condensing)
• Storage Temperature: -10~60°C; 0-80%RH (Non-condensing)
Package Contents
• HDMI, VGA, and Stereo Audio Transmitter
• HDMI Receiver
• Face Plate – White
• Terminal Block to DC Jack Adapter
• Power Adapter
• Screw Pack
• 4ft RJ11 Cable
• 4ft RS232 DB9 Cable
• RJ11 to RS232 DB9 Adapter
• HDMI Cable Tie
• User Manual
Product Support
Downloads

•Download the manual
•Download the technical specifications

Audio Troubleshooting

Symptom/Problem:
No audio or distorted audio from the 3.5mm Stereo Audio input port
Solution:
Cycle power to the wall plate transmitter while a VGA and 3.5mm Stereo Audio device, such as a laptop, is connected and transmitting a signal to the wall plate. Use one of the methods described below to cycle power to the wall plate transmitter.
• If the AC power supply is connected to the power input of the wall plate transmitter, then disconnect and reconnect the AC power supply from the wall outlet
• If the AC power supply is connected to the receiver, then disconnect and reconnect the AC power supply from the wall outlet or disconnect and reconnect the Cat5 cable from the wall plate transmitter.
• Press and hold the Select button on the front of the wall plate transmitter for five seconds to power off the wall plate and then press and hold the Select button for an additional five seconds to power on the wall plate.