Description

3M Controltac Graphic Film IJ162

3M Controltac Graphic Film IJ162

This is a positionable, removable 4 mil film for short-term, durable floor graphics on sealed surfaces. This transparent film has a matte gloss and clear, pressure-activated adhesive. It is approved for use with specified piezo printers.

Product Bulletin IJ162-114

Controltac™ Graphic Film
IJ162-10 and IJ162-114
For Solvent, UV and Latex Inkjet Printing Only
1. Product Description
A. Product Features  4-mil white opaque or clear vinyl film
 Slideable and repositionable
 Excellent hiding power (white film)
 Easily removable
 Meets certain NFPA (National Fire Protection Agency) requirements
 Outstanding resistance to dirt and other environmental factors and wear from high foot
traffic when protected by the recommended overlaminate
B. Recommended Types of
Graphics and End Uses
When constructed and used as described in this Bulletin, these types of graphics and end
uses may be warranted by the 3M™ MCS™ Warranty or the 3M Performance Guarantee.
Please read the entire Bulletin for details.
When constructed and used as described in this Bulletin, these types of graphics and end
uses may be warranted by the 3M™ MCS™ Warranty or the 3M Performance Guarantee.
Please read the entire Bulletin for details.
 Floor graphics on most indoor hard surface flooring
C. Performance Overview 3M tests the performance of both individual products and finished graphic constructions.
This table shows the best performance expected from this product both without a Warranty
Period and with a Warranty Period.
For detailed graphic construction and application options along with specific Warranty
Periods, please see the Warranty Information, Section 5.
Note: The values below are for comparison only. A slip-resistant overlaminate is required
for all 3M Floor Graphics, whether or not they have a warranted period of time.