Infrared (IR) Remote Control Repeater Kit (TAA Compliant)

Description

Infrared (IR) Remote Control Repeater Kit (TAA Compliant)
Forward infrared signals to operate electronic components behind closed doors
4.3
 | 
30 Reviews

Product # :
40430
Description Features Certifications Specs Uses Contents Support
Product Features
• Allows for control of devices behind closed doors
• Includes emitters to control up to four devices
• LED light confirms IR communication
Product Description
Does your entertainment system have wooden doors, or would you like to mount your components in a closet? Without a clear line of sight infrared (IR) signals from a remote control will not reach the equipment. We have the answer. Our remote control repeater kit contains all equipment necessary to remotely operate 4 components (expandable to 12 components) using your standard remotes. Mount the IR receiver in a central location and connect to the IR distribution block. This block repeats the signals through emitters to your electronic components. Your components may now be mounted in your entertainment center, closet or another room! The kit is self-contained and easy to connect.

With this kit, you may mount a receiver in a convenient place on or near your entertainment system. The receiver has a 9 foot cable that is then attached to the repeater system that is mounted in your entertainment cabinet. The kit includes 4 emitters. These emitters are connected from the repeater system and placed over the IR receiver of the equipment.

The IR receiver and IR repeater have blinking blue LEDs to confirm receipt of the IR signal; the IR repeater is designed for mounting on shelf or wall. You can use your existing remotes for simple installation and hookups. Packaged for resale.

For your convenience, the AC/DC Adapter (#98025) is available for this item. To order this replacement part, please call us at 1-800-506-9607.

Please Note: Careful consideration must be used when placing the IR receiver near a plasma display. Since a plasma display emits IR frequencies during use, it may cause interference. At this time, the ATT U-Verse cable boxes are not compatible with the C2G, formerly Cables To Go, IR Receiver Kit. The product team at C2G is working hard to find a solution for this issue and will update you as soon as possible. Replacement components may be ordered online: 10ft Infrared Receiver with 3.5mm Plug (#98045), 10ft Single Infrared Emitter Cable (#40432) and 10ft Dual Infrared Emitter Cable (#40433).
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
75ft RapidRun® Multi-Format Runner Cable – Plenum CMP-Rated
$572.99
Wiremold® Uniduct 2800 External Elbow – White (TAA Compliant)
$1.99
Wiremold® Uniduct 2800 Tee – White (TAA Compliant)
$1.99
Wiremold® Uniduct 2800 Internal Elbow – White (TAA Compliant)
$1.99
Wiremold® Uniduct 2700 90° Flat Elbow – Ivory (TAA Compliant)
$1.99
Wiremold® Uniduct 2800 Blank End Fitting Multipack ( 2 pack) – White (TAA Compliant)
$4.99
50ft Velocity™ One 3.5mm Stereo Male to Two RCA Stereo Male Y-Cable
$29.99
Product Certifications
Product Specifications
Color : Black
UPC : 757120404309
Warranty : 1 Year
Vendor : C2G
Weight : 1.220 LB
For more detailed specifications, please read this.
• IR Receiver has size of 2.25in (L) x 0.5in (W) x 0.5in (H); 9ft cable is attached for connection to IR Repeater; IR receiver has blue LED to confirm receipt of IR signal.
• IR Repeater Block has size of 2.5in (L) x 2.25in (W) x 1in (H); requires 12 VDC (adapter included)
• Emitters have a dual emitter y-cable; overall length is 9 feet; final 3 feet may be separated.
Product Uses
The diagram below shows how the transmitter of this kit may be extended using a Cat5 cable and a three conductor 3.5mm keystone, like our part number 37036. The bulk Cat5 cable connects from the screw terminal connection on the IR distribution block to the 3.5mm keystone. Only three of the eight conductors of the Cat5 cable will be used. The pinout below should be used to make this connection:

IR Distribution Block – 3.5mm keystone
•IR – 3.5mm keystone
•+12VDC – Sleeve (- or G)
•GND – Ring (S or R)
•Signal – Tip (+ or L)

Package Contents
• IR distribution block
• Mini IR receiver
• Two dual IR emitters
• AC/DC adapter
Product Support
Downloads

• Download the manual