Description
Kapco Water-Proof Adhesive Backed White Vinyl
Outdoor Calendered vinyl with permanent clear adhesive. No lamination required for outdoor use up to six months. For best results use pigmented inks.
Adhesive Backed Water-Proof White Vinyl
for Water-Based Inkjet Printers
Properties:
Product Number: KJWPV5002
Material: 3.2 mil White Calendered Vinyl
Adhesive: Clear Permanent Acrylic
Caliper/Gauge: 13.8 mil (Coating, Vinyl, Adhesive & Liner)
Weight: 345 g/m2
(14.7oz/yd2)
Whiteness: 105
Brightness: 99
Gloss (60°): 2.6 (avg)
Printer/Ink Compatibility:
Ink saturation level of this product is 250% and heavy coated paper setting in most RIPs is appropriate. Inkjet coating is designed for use primarily with dye based inks. Although pigmented inks
may be used, a slight color gamut difference may be observed. Product can be printed on Encad/Kodak (dye inks only), Hewlett-Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker
(dye inks only), Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) and Roland
Hi-Fi Jet (pigmented inks only)
Ink Dry Time: Varies with type and amount of ink, relative humidity
and temperature.
Enviornment:
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
packaging.
Handling Requirements: Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied withthe coated surface
wound out. When rolling graphics, always roll so that the
thinner material is on the outside surface of roll.
Life Expectancy: Outdoor – up to 6 months without lamination.
Shelf Life: 6 months from ship date when stored in proper
conditions.
Finishing/Lamination: A pressure sensitive vinyl laminate is recommended, to
give surface protection from dirt and abrasion. Thermal
laminates should not be used. Before lamination, please
allow image to dry for 24 hours.