Lumina 2407-003 Premium Flexible Engineering Grade Reflective Film Black

Description

Lumina 2407-003 Premium Flexible Engineering Grade Reflective Film Black
FDC 2407 Series Premium Flexible Engineering Grade Reflective Film is a glass beaded retro-reflective vinyl film rendering excellent reflectivity at night. This product is for fleet and vehicle markings where riveted and corrugated surfaces may be required. This film is highly resistant to the extremes of hot, cold, dry and humid weathering conditions. To order punched material, use part number 2457.

2407 Series – FDC Premium Engineering Grade Reflective Film
FDC 2407 Series Premium Flexible Engineering Grade Reflective Film is a glass beaded retro-reflective
vinyl film rendering excellent reflectivity at night. This product is for fleet and vehicle markings where
riveted and corrugated surfaces may be required. This film is highly resistant to the extremes of hot, cold,
dry and humid weathering conditions. To order punched material, use part number 2457.
Film Technology: ………….. Retroreflective
Film Thickness:…………….. 5.9 mil.
Color Availability:………….. 11 Colors – see color chart
Outdoor Durability: ……….. 7 years – when properly processed and displayed
(*Expected Durability: unprinted media, vertical exposure and ideal conditions.)
Adhesive: ……………………… Permanent – Clear Acrylic
Adhesion:……………………… 15 min = 3.4 lbs/in, 24 hrs = 5.3 lbs/in
(Typical values – individual values may vary. Test prior to use.)
Liner: ……………………………. 90# Layflat
Application: ………………….. Flat Surfaces, Simple Curves, Rivets and Corrugations
(*Best results are obtained when applied to flat surfaces and simple curves, but this
material may be used over rivets and corrugations with careful application. Transfer
tape is always recommended to limit damage from over stretching. Wet application
is not recommended and will affect this products expected durability and invalidate
its warranty.)
Printing:…………………………Thermal Transfer, Screen
(*A print test is recommended prior to production to determine the suitability of this
product given a particular printer, rip, ink type and ink set. Allow at least 24 hours
for inks to dry and properly outgas prior to lamination.)
Elongation:……………………. 120%
Temperature: …………….. Minimum Application Temperature is 60°F
(*Temperature applies for: graphics, substrate and environment.)
Service Temperature Range is -22F to 176°F
Shelf Life:…………………. 1 year – when stored at 70°F and 50% relative humidity
FDC2407 2457