Mactac MACmark TuningFilms Brushed Metals Brushed Steel TF16802BF
Tuning Film Brushed Metal Vehicle Wrapping Film
This is a MACtac family of embossed and pigmented 5.5 mil polymeric stabilized, vinyl films
designed for vehicle wrapping which are available in Brushed Aluminum. This film is coated
with a high performance, micro-structured (bubble-free) permanent, acrylic adhesive for easy
application. The adhesive is protected by a 90# polycoated release liner for added stability and
layflat with a light grey MACtac back printing,
This film is an outstanding choice for adding unique looks to a number of different vehicles and
surfaces such as internal or external vehicle parts and electronic equipment like cell phones,
computer covers, etc.
Property Typical Values Test Method
Thickness, inches (mm)
Face plus adhesive 0.0071 (0.18)
Face Material Data, 68?F (20?C)
Tensile strength lb./in. (N/15mm)
Elongation % at break
> 12 (40)
Peel Adhesion lb./in. (N/25 mm)
180? on Stainless Steel
– 24 hr.
– 1 week
Dimensional Stability, %
48 hours @ 158°F < 0.3 FTM- 14 10 x10 Sample Bonded to aluminum Temperature Range Application: End Use: 50? to 104?F (10? to 40?C) -40? to 194?F (-40? to 90?C) Flammability Self-extinguishing ISO 3795 ? Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values. Durability Vertical exposure (Horizontal exposure: reduced by 40%2): Vertical application (years) Horizontal application (years) Zone 1 Zone 2 Zone 3 Zone 1 Zone 2 Zone 3 Black, Titanium & Graphite 5 4 Not Recommended 3 2.4 Not Recommended Steel 4 3 Not Recommended 2.4 1.8 Not Recommended Aluminum 2.5 1.5 Not Recommended 1.5 1.0 Not Recommended Zone 1: North America, North, West, Central & Eastern Europe (excluding desert areas of the USA which are in zone 3) Zone 2: Central & South America, South Europe, Asia Pacific (excl Australia & New Zealand) Zone 3: Greater Middle East (e.g. Egypt, Israel, Iran, Morocco, Western Sahara, Algeria, Tunisia, Libya, and Mauritania), Africa, Australia, New Zealand, USA (Arizona, California, Florida, Nevada, New Mexico, Texas, Utah), and Mexico. Shelf Life Tuning Films have a two year shelf life when stored between at 60- 80?F (15 - 25?C) and 50% relative humidity or less. Removability Tuning Films remove cleanly with heat. Chemical Resistance This product is resistant to most oils and grease, fuels, aliphatic solvents, weak acids, salts and Alkalis. Limitations 1) The user is responsible for determining the products suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version Recommendations All surfaces must be thoroughly cleaned from dust, dirt, grease and any other contaminate. Clean with soapy water first followed by a good cleaning with Isopropyl alcohol to remove any greasy or soap residue. 1) On flat or slightly curved surfaces: Apply directly on the substrate by the dry application method. 2) On convex areas: Heat the film with a heat gun before stretching it over the convex area. Do not over heat or over stretch the films, because the structured appearance could be damaged. 3) On corrugated or concave areas: If the film is stretched into a corrugation it may pop-out after a few weeks. We, recommend to cut the film and to apply it in the corrugation without tension. 4) On rivets: If you apply these films over rivets the circumference of the rivet must be relief cut or tenting will occur. 5) Compatibility of Paints and Lacquers: This should always be tested first by the end user, prior to use. 6) Removability: Once heated, Tuning Films Brushed Metal is easy to remove. Any adhesive residue can be removed with isopropyl alcohol.