Description
MACmark TuningFilms Carbon Fiber Graphite TFL8801B
Tuning Film Carbon BF Vehicle Wrapping Film
Product Description
This is a MACtac family of embossed colored vinyl films designed for vehicle wrapping. The
Carbon Fiber faces are 5.1 mil cadmium-free polymeric vinyl, available in four gloss colors.
Carbon Fiber films are coated with a high performance, low tack and micro-structured (bubblefree), permanent, solvent acrylic adhesive for easy application. The adhesive is protected by
an 80# micro-embossed, polycoated release liner for added stability and layflat with a light grey
MACtac back printing
The Tuning Film Matte white and Matte black faces are 3.9-mil cadmium-free polymeric vinyl
films coated with high performance, repositionable, clear acrylic adhesive. This product utilizes
an 83# white kraft liner for stability and layflat with blue MACtac backprinting.
Finish Stock Number
Carbon Fiber Black TFL1088BF
Carbon Fiber White TFL1028BF
Carbon Fiber Silver TFL1068BF
Carbon Fiber Graphite TFL8801BF
Tuning Matte Black TF0088
Tuning Matte White TF0028
These films are outstanding choices for adding unique looks to a number of different surfaces
such as internal or external vehicle parts, above-the-water boat hull wrapping, furniture
finishing and electronic equipment wraps like on cell phones, computer covers, etc.
Physical Properties
Property Typical Values Test Method
Thickness, inches (mm)
Face plus adhesive
Carbon Fiber Matte
0.0061 (0.130) 0.0047 (0.12)
ASTM D-645
(ISO 543)
Face Material Data, 68?F (20?C)
Tensile strength lb./in. (N/15mm)
Elongation % at break
> 12 (40) >9.8 (27)
> 150% >150%
DIN 53455-5
Peel Adhesion lb./in. (N/25 mm)
180? on Stainless Steel
-20 min. 2.8 (13) 4.6 (20)
ASTM D-903
(FTM-1)
– 24 hr.
– 1 week
3.4 (15) 6.8 (30)
3.7 (16) 8.0 (35)
Dimensional Stability, %
48 hours @ 158°F < 0.3 < 0.3
FTM- 14
10 x10 Sample
Bonded to aluminum
Temperature Range
Application:
End Use:
50? to 104?F (10? to 40?C)
-40? to 194?F (-40? to 90?C)
Flammability Self-extinguishing ISO 3795
? Values given are typical for unprocessed product and are not for use as specifications.
Processing may change the values.
Durability
Vertical exposure (Horizontal exposure: reduced by 50%):
Vertical application (years) Horizontal application (years)
Zone 1 Zone 2 Zone 3 Zone 1 Zone 2 Zone 3
TF black matt 10 7.5 5 6 4.5 Not
Recommended
TF white mat 10 7.5 5 6 4.5 Not
Recommended
TF Carbon Fiber black BF 5 4 2.5 3 2 Not
Recommended
TF Carbon Fiber white BF 5 4 2.5 3 2 Not
Recommended
TF Carbon Fiber Graphite BF 4 3 2 2 1.5 Not
Recommended
TF Carbon Fiber Silver BF 4 3 2 2 1.5 Not
Recommended
TF Carbon Fiber Gold BF 4 3 2 2 1.5 Not
Recommended
Zone 1: North America, North, West, Central & Eastern Europe
(Excluding desert areas of the USA which are in zone 3)
Zone 2: Central & South America, South Europe, Asia Pacific, Australia South coastal (Perth to
Brisbane),
New Zealand
Zone 3: Greater Middle East, Africa, Australia, USA (Arizona, California, Florida, Nevada, New Mexico,
Texas,
Utah), and Mexico.
Shelf Life
Tuning Films have a two year shelf life when stored between at 60- 80?F (15 - 25?C) and 50%
relative humidity or less.
Removability
Tuning Films remove cleanly with heat.
Chemical Resistance
This product is resistant to most oils and grease, fuels, aliphatic solvents, weak acids, salts and
Alkalis.
Limitations
1) The user is responsible for determining the products suitability, including adhesion and if
needed, removal characteristics when used in applications other than listed specifically in this
Performance Guide.
2) If there are any questions about applications, please contact your Mactac sales representative
to discuss your requirements for recommendations.
3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac
website for the latest, most up-to-date version
Recommendations
On flat or slightly curved surfaces:
Apply directly on the substrate by the dry application method.
1) On convex areas:
Heat the film with a heat gun before stretching it over the convex area.
2) On corrugated or concave areas:
If the film is stretched into a corrugation it may pop-out after a few weeks. It is, therefore,
recommended to cut the film and to apply it in the corrugation without tension.
3) On rivets:
Apply the film over the rivet with high pressure and heat it with a heat gun (temperature over
500°C). The film may lift slightly after few weeks.
4) Marine applications:
We strongly recommend edge sealing.
Adhesive CategoryBubble Free
Adhesive TypePermanent Acrylic
Brand NameMACmark
ColorGray
FilmsVinyl (PVC)
FinishTexture
Length82'
Liner Category80# Polycoated Kraft
Outdoor Durability5 Years
Precise ProgramN
Secondary ColorCarbon Fiber Graphite
Stock TypeVinyl
Thickness5.1 mil
Width60"
Reviews
There are no reviews yet.