Mactac PermaFlex Polycarbonate Rigid Overlaminating 5 Mil

Description

Mactac PermaFlex Polycarbonate Rigid Overlaminating 5 Mil
PERMACOLOR® Specialty Rigid Overlaminating Films
PermaFlex® Polycarbonate
These unique laminating films are designed to add texture, rigidity, depth and slip resistance to your finished printed
graphics. Great for long and short term applications including trade shows, floor graphics and POP. Companion Print
media: StreetRAP™, all REBEL and IMAGin Print media
PERMACOLOR PermaFlex 5.0 mil Lustex Laminate
PERMACOLOR PermaFlex 5.0 mil Lustex Laminate
Adhesive Type: Permanent Acrylic Brand Name: PERMACOLOR Color: Clear Films: Polycarbonate (PC) Length: 150′
PERMACOLOR PermaFlex is a 5.0 mil film with a Lustex textured, tough polycarbonate surface. The low gloss texture helps eliminate glare, protection from abrasion, moisture and color fade from UV light.
Adhesive TypePermanent Acrylic
Brand NamePERMACOLOR
ColorClear
FilmsPolycarbonate (PC)
Length150′
Liner Category1.4 mil Polyester (PET)
Outdoor Durability3 Years
Precise ProgramN
Thickness5.0 mil
IP6200 Lustex 5
Media: 5.0-mil Polycarbonate Film with Special “Lustex” Finish
Adhesive: Clear, Permanent Acrylic Pressure-sensitive
Liner: 1.2-mil PET
Features and Benefits:
• Textured lustex finish polycarbonate
• Eliminates glare
• Three year outdoor / Five year indoor durability
• Protects from abrasion and moisture
• Retards color fade caused by UV light
Typical Uses:
• Floor graphics indoor use only
• Trade show headers
• Mouse pads
• Direct food contact
PermaFlex®
PermaFlex®
Physical Properties Typical Values
Thickness, inches (micron)
Film plus adhesive 0.0065 (165)
White Light Transmission, %
(Note: Glass =100) 92
Gloss, (60° angle) 15
Adhesive PH Neutral
Co-e†cient of Expansion 1.7 X105 in/in/°C
Temperature Ranges
Application: Above 50° F (10°C) for best results
End Use: -20° to 200° F (-29° to 93°C)
Shelf Life:
Two years when stored at 75°F (24°C) and 50% relative
humidity or less. Note: Mactac recommends the rolls be
stored on end or suspended from the core.
Physical Properties Typical Values
Thickness, inches (micron)
Film plus adhesive 0.0115 (292)
White Light Transmission, %
(Note: Glass =100) 92
Gloss, (60° angle) 13
Adhesive PH Neutral
Co-e†cient of Expansion 1.7 X105 in/in/°C
Temperature Ranges
Application: Above 50° F (10°C) for best results
End Use: -20° to 200° F (-29° to 93°C)
Shelf Life:
Two years when stored at 75°F (24°C) and 50% relative
humidity or less. Note: Mactac recommends the rolls be
stored on end or suspended from the core.
Stock No. Roll Width x Length Weight: Pounds
IP6202W37L150 37” x 150’ 30
IP6202W51L150 51” x 150’ 41





src=”https://www.mactac.com/UserFiles/Graphics/Technical_Assistance/TA2076_Outgassing_Prevention.pdf” height=”1020″ width=”800″>

src=”https://www.mactac.com/UserFiles/Graphics/Technical_Assistance/TA2032_Surface_Preparation.pdf” height=”1020″ width=”800″>

src=”https://www.mactac.com/UserFiles/Graphics/Technical_Assistance/TA2010_Cutting_Permaflex.pdf” height=”1020″ width=”800″>
< IP6202W51L150 IP6202W37L150