Mactac PermaPrint Back Mounting Films PP2011 Opaque

Description

Mactac PermaPrint Back Mounting Films PP2011 Opaque
PERMACOLOR® Back Mounting Films
Intermediate Acrylic on a PET carrier
PERMACOLOR® ColorPrint™ PP2011
Economical, general purpose, self-wound, low tack and moderate bond acrylic adhesive based mounting film with a clear
PET carrier.
PP2011 Clear
Media: Thin Polyester Film
Adhesive: Coated Both Sides with
Acrylic Pressure-sensitive
Liner: White, Moisture-stable, Single Release
Liner
Features and Benefits:
• Low initial tack allows for easy fixing of mistakes
• One release liner for faster laminating
Typical Uses:
• General purpose mounting to substrates such
as Fome-core®, Gator® board, Cresent® board,
Masonite® and Sintra®
Durability
Finish
Adhesive
Special Features
Durability
Finish
Adhesive
Special Features
Durability
Finish
Adhesive
Special Features
Physical Properties Typical Values
Thickness, inches (µm)
Carrier plus adhesive 0.0024 (60)
Quick Tack , lb./in2
Glass
side 1/side 2
2.1/3.0 (9/13)
Shear, hours to fail – Stainless Steel >1000
Peel Adhesion, lb/in.
Stainless Steel – 30 min.
– 24 hr
1.8/2.3 (8/10)
2.5/3.4 (11/15)
Adhesive PH Neutral
Temperature Ranges
Application: 40° to 120° F (5° to 49°C) for best results
End Use: -20° to 212° F (-29° to 100°C)
Shelf Life:
Two years when stored at 75°F (24°C) and 50% relative humidity
or less. Note: Mactac recommends the rolls be stored
on end or suspended from the core.
Stock No. Roll Width x Length Weight: Pounds
IP2013 79” x 164’ 67
PP3316164 60.2” x 164’ 30
PP3315164 51.1” x 164’ 26
PP3314164 40.9” x 164’ 21
PP3316164 PP3315164