Mojave CMTT200WSL 2.0 mil. White Polyester With a permanent acrylic adhesive mounting film

Description

Mojave CMTT200WSL 2.0 mil. White Polyester With a permanent acrylic adhesive mounting film
Catalina Graphic Films’ Mojave Mounting Films converts non-pressure sensitive films—such as membrane
switches, posters, mouse-pads, decals and medical applications—into pressure sensitive materials.
RECOMMENDED APPLICATIONS
• Decals
• Indoor
• Outdoor
OVERVIEW
Face Film 2.0 mil. White Polyester
Adhesive Permanent / Permanent Acrylic
P84 white acrylic pressure activated permanent
Liner 40# (3.0 ± 0.2 mils) white super calendered
paper coated-silicone coated on both sides
Opacity Good
Indoor Durability Up to 3 Years
SPECIFICATIONS
Application These products are intended for mounting substrates and signage
such as styrene, rigid vinyl, polyester, acrylic and polycarbonates.
Total Product Thickness 8.0 ± 0.2 mils
Minimum Application Temperature +40º F
Service Temperature Range -20° F to +150° F
Water Resistance
Excellent: test piece (with vinyl face film applied) ages 24 hrs. applied
to stainless steel is not affected when immersed in 70ºF water for
seven days
Solvent Resistance
Good for most petroleum based solvents. Ultimate resistance to
solvents is highly dependent on the face film or substrate used. Edge
sealing is recommended in high solvent exposure areas
Shelf Life One year when stored at 70°F and 50% relative humidity
2.0 mil. White Polyester With a permanent acrylic adhesive on both sides and 40#/C2S release liner

CMTT200WSL