Mojave LM1CL 1.0 mil. Clear Polyester

Description

Mojave LM1CL 1.0 mil. Clear Polyester
Catalina Graphic Films’ Mojave Digital Media family of Overlaminates enhance overall graphic depth and gloss
while protecting printed materials from UV radiation, environmental elements and general abuse.
RECOMMENDED APPLICATIONS
• Simple Curves
• Decals
• Indoor
OVERVIEW
Face Film 1.0 ± 0.1 mils clear, polyester
Adhesive 1.0 ± 0.1 mils P-22, clear, acrylic, pressureactivated,
high-performance permanent
Liner 2-mil clear, silicone-coated-one-side, clear film
Opacity Clear
Gloss Level Gloss
Outdoor Durability Indoor Only
SPECIFICATIONS
Application
This product is intended for use as an overlaminating film as a
protective layer for printed substrates that are applied to indoor
surfaces.
Product Thickness (Film Only) 1.0 – 1.1 mils
Minimum Surface/Ambient Air
Application Temperature +35° F.
Service Temperature Range -20° F to +150° F.
Water Resistance Good.
Solvent Resistance Good for most petroleum solvents and lower aliphatic alcohols.
For ultimate solvent resistance, edge sealing is recommended.
Adhesion 40+ oz. per lineal inch width (180 peel from Stainless Steel;
15-minute, room temperature dwell on test panel).
Shelf Life One (1) year when stored under conditions of 70°F and 50%
relative humidity.
1.0 mil. Clear Polyester WITH A PERMANENT ACRYLIC ADHESIVE ON A CLEAR FILM LINER

LM1CL5450A