Nikkalite Pre-Striped Barricade Type I Engineering Grade (8110 Series) Orange/White 4″ Right stripe 8″ X 50 Yards

Description

Nikkalite Pre-Striped Barricade Type I Engineering Grade (8110 Series) Orange/White 4″ Right stripe 8″ X 50 Yards
Pre-Striped Barricade
Nikkalite™ Pre-Striped Barricade (PSB) sheeting has alternating 4” or 6” stripes running diagonally at an angle of 45° and comes in orange/white or red/white rolls. The day and night (retroreflective) colors of the orange and red stripes are almost identical, resulting in a sharp contrast between the white stripes and the colored stripes, giving optimum target value.
The material is coated with an aggressive, high-tack pressure sensitive adhesive that will bond well to most substrates used in the construction zone signing. The red and orange stripes are printed under the top film layer so the sheeting is scratch resistant.
Nikkalite™ Brand Engineering Grade (hereinafter referred to as “EG”) retroreflective sheeting is a beaded
plastic material that renders high retroreflectivity at night. It is designed for use mainly on traffic signs and is
highly resistant against the extremes of hot cold, dry, and humid weathering conditions. Traffic signs faced
with Nikkalite™ EG sheeting and transparent process colors are attractive in appearance and highly visible
during both day and night, and contribute greatly to driving safety. This sheeting is available in seven
standard colors with one type of pre-coated adhesive, Pressure-sensitive (hereinafter referred to as “PS”).
2. TYPES OF ADHESIVES
The 8100 Series sheeting is pre-coated with PS adhesive that will bond the sheeting to the substrate with the
application of pressure only. The pressure can be applied with a hand-roller, a squeegee, or a roller
applicator. Permanent bonding will take place approximately 48 hours after application. DO NOT ALLOW
THE ADHESIVE TO FREEZE DURING THE 48 HOUR CURING PERIOD.