OCÉ HWFB Heavyweight POLYESTER FABRIC
Océ HWFB is 100% polyester fabric has a consistent, tight weave pattern and can be used for many different applications. A graded heavy weight fabric at 300 Denier it is perfect for outside or inside applications. Now with an Onyx ICC profile it can be used for
a fabric backlit application with SEG (silicon edge grip) framing systems for the Océ Colorado 1640 Printer. Océ HWFB can also be
easily recycled. Compatible with UV, UV gel, Latex and Aqueous printers.
• Basis Weight – 163 gsm Caliper – 9 mil Surface Finish: Matte Whiteness: 128 CIE Brightness: 93 Opacity: 82 Material: 100% Polyester Target Values
• Excellent image quality Water resistant Exceptional detail Wide color gamut
Conditions and Shelf Life
• Temperature – 50-80°F. (10°-25°C). Relative humidity – 40%. Store in original packaging and plastic bag. Best stored in cool dry area. Repack open rolls when not in use. One year at conditions noted above Allow material to stabilize to room conditions 24 before use.
Environmental, Health & Safety
• No Material Safety Data Sheet required. Waste is not suitable for recycling
This information is presented as a
general guide and is not a performance
guarantee. The user should determine
prior to use the suitability of the
material for the specific application or
Printer and driver setting need set
up to ensure the best performance.
Appropriate ink loads must be set
for the ink/printer combination being
used. Please refer to the Photo Tex
specification sheet on our website for
specific printer/ink information.
Photo Tex is recommended for use with
the Océ ColorWave 700 printer. Photo Tex
Original is printable on aqueous pigment
inks, latex, UVgel, UV curable. Please see
the Photo Tex specification sheet for
more specific information on results and
waterfastness with your printer and ink
ITEM NUMBER WIDTH X
HWFB24 24″ x 150′ 1 Roll 3″
HWFB36 36″ x 150′ 1 Roll 3″
HWFB60 60″ x 150′ 1 Roll 3″