Description
Oce PHOTO TEX Fabric for Aqueous, UV, and Latex printers
Product Description
Photo Tex is a peel and stick, US patented, adhesive material made of polyester fabric. It can be installed on almost any surface
and remain adhered in all-weather conditions. It’s dependable adhesive can be removed and reused multiple times without any
alteration or loss of StikAbility™. This fabric material is non-toxic, green and phthalates free. Photo Tex the original version, is
compatible with aqueous inkjet, UV, UVgel, latex and the Océ ColorWave 700 printer.
Physical properties* Biodegradable over time No PVC Non Toxic
• Caliper: 12 mil Basis Weight: 240 gsm Target Values
Main Applications
• Wallcovering Borders, Murals Wall Advertising Messaging POP Event Messaging
Finishing Recommendations Can be liquid laminated for longer outdoor longevity. You can contour cut (kiss-cut) Photo Tex easily.
This information is presented as a
general guide and is not a performance
guarantee. The user should determine
prior to use the suitability of the
material for the specific application or
purpose.
Important
Printer and driver setting need set
up to ensure the best performance.
Appropriate ink loads must be set
for the ink/printer combination being
used. Please refer to the Photo Tex
specification sheet on our website for
specific printer/ink information.
Printer/Ink Compatibility
Photo Tex is recommended for use with
the Océ ColorWave 700 printer. Photo Tex
Original is printable on aqueous pigment
inks, latex, UVgel, UV curable. Please see
the Photo Tex specification sheet for
more specific information on results and
waterfastness with your printer and ink
combination
PHTX24100 24” x 100’ 1 Roll 3”
PHTX36100 36” x 100’ 1 Roll 3”
PHTX42100 42” x 100’ 1 Roll 3”
PHTX54100 54″ x 100′ 1 Roll 3″
PHTX60100 60” x 100’ 1 Roll 3”