OCE PHPR7 – Satin Photo Paper 7 mil For The Océ ColorWave 600/650 Printer
Satin finish designed to provide superior performance in the Océ ColorWave 600/650 to produce indoor display graphics.
Océ PHPR7 is a 7 mil satin resin coated photo paper and is designed for use in the Océ ColorWave® 600/650 printing system with Océ CrystalPoint® technology.
• Caliper: 7 mil
• Basis Weight: 170 gsm
• Opacity: 86%
• Lab = 91.2, a = -.04, b = -2.4
* Target Values
• Instant dry
• Outstanding image quality
Recommended Storage Conditions And Shelf life:
• Temperature 55°-90° F. (20°-50° C).
Relative Humidity 30-70%
• Shelf life-2 years with proper storage
• Allow material to stabilize to room condi-
tions 24 hours before use
Environmental, Health & Safety:
• No Material Safety Data Sheet required.
• Waste not suited for recycling
• Indoor display graphics/POP
For best results use Cold fi lm laminates
(<140˚F) is advised and a laminator with a
soft rubber roller is preferred.
Warm Laminates: In order to get a good
adhesion of the warm laminates the advised
working temperature of 185-203˚F needs to
be used. However, when laminating at these
temperatures there is a risk of the printed
image becoming blurry due to melting of the
toner. Good results can be obtained with
warm laminates when following the instructions:
• Use media >140 gsm
• Use laminates > 5 mil
• Encapsulate the print
• Avoid mechanical stress on the print
Hot film laminates, liquid laminates and
transfer laminates are not recommended.
This information is presented as a general
guide and is not a performance guarantee.
Th e user should determine prior to use the
suitability of the material for the specific
application or purpose.
Océ PHPR7 is recommended for use with the
new Océ CrystalPoint® technology in the Océ
ColorWave® 600/650 printer.
item number Width X length Quantity Per carton core
PHPR724100 24” x 100’ 1 Roll 3”
PHPR736100 36” x 100’ 1 Roll 3”
PHPR742100 42” x 100’ 1 Roll 3”