Oracal 3951 RA/290 G Wrap Kit

Description

Oracal 3951 RA/290 G Wrap Kit

Oracal 3951 RA/290 G Wrap Kit
Bundle includes one roll of ORAJET 3951 RA film and one roll of ORAGUARD 290 Gloss overlaminate.

http://www.britrade.sk/storage/file/orajet-3951-ra.pdf

Description
Premium Cast PVC film white, gloss surface
Release paper
PE-coated silicone paper on both sides, 165 g/m², 180 µm
Adhesive
Solvent polyacrylate, repositionable, permanent, grey
Area of use
For long-term displays with the highest degree of brillancy and durability in outdoor applications, e.g. complete car
wrapping. The “Rapid Air” technology enables easy and quick bubblefree application, especially of large-sized graphics
or decals. Entrapped air can be easily removed simply by rubbing out under the film. For more curved surfaces such as
corrugations or rivets these films are generally to be handled like calendered films.
Thickness* 55 micron
Dimensional stability adhered to steel, no shrinkage in cross direction, in length 0.1 mm
max.
Temperature resistance adhered to aluminium, -50°C to +100°C, no variation
Seawater resistance adhered to aluminium, after 100h/23°C no variation
Resistance to solvents and chemicals at room temperature, 72h after adhesion to aluminium, short-term
resistant to most oils and greases, fuels, aliphatic solvents, weak
acids, salts and alkalis
Fire behaviour adhered to steel, self-extinguishing
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
18N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 19 MPa
across min. 19 MPa
Elongation at break (DIN EN ISO 527)
along min. 120%
across min. 120%
Shelf life** 2 years
Minimum application temperature > +10°C
Service life
under vertical outdoor exposure (normal climate of Central Europe)
10 years (not printed)
Attention:
After printing the ink must be thoroughly dry in order to avoid any affect on the later combination with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at
least three weeks and to completely cure respectively. The compatibility of selected lacquers and paints should be
tested by the user, prior to application of the material. Furthermore the application information published by ORAFOL
is to be considered.
Technical data
(FINAT TM 14)
(DIN 50021)
* average
(without protective paper and adhesive)
** in original packaging, at 20°C and 50% relative humidity
Printing method
Solventbased inkjet printing
Technical Data Sheet
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications customers
should independently determine the suitability of this material for their specific purpose, prior to use