Orafol ORABOND 1392TM Double-sided Adhesive Tape
This double-sided tape consists of a hard PVC film carrier, layered on both sides with a modified solvent acrylate adhesive. It
has a very good resistance against UV radiation, extreme temperatures, chemicals, solvents and humidity. Its highly shearresistant adhesive has excellent durability when attached to metal, varnish and high energy surfaces. It has a good adhesive
durability when attached to low energy surfaces. Because of its high adhesive mass it is also appropriate for rough or
Hard PVC film, white, 1.5-mil
White silicone-coated paper on both sides, with blue ORAFOL branding, 60#
Modified solvent acrylate
Area of Use
Used for the secure attachment of truck and car mirrors in plastic housings. Used as an adhesive medium for type,
performance and information signs as well as for extruded synthetic profiles and for durable installation in the furniture
industry. Used for the attachment of trims, bars and laminates to a variety of surfaces. For the fixing of covers and handles in
the audio, household appliance and electrical industry.
Thickness* (adhesive and carrier) 10.25-mil
Temperature resistance -40°F to +158°F
Resistance to solvents and chemicals With expert application resistant to most oils, grease,
fuels, aliphatic solvents, weak acids, salts and alkalis
LoopTack* (FINAT TM 9) 5.25 lb/in
Adhesive power* 7.31 lb/in after 1 min
(FINAT TM 1, on stainless steel, one side 8.22 lb/in after 20 min
covered with 2-mil polyester film) 8.68 lb/in after 24 h
Shear strength* >400 h at 73°F
(FINAT TM 8, on stainless steel, one side >6 h at 158°F
covered with 2-mil polyester film)
Temperature resistance* (S.A.F.T.) 212°F
Shelf life** 2 years
Application temperature > +59°F
Available widths (in inches)
slit rolls: 1/2, 3/4, 1, 2
* average ** in original packaging, at 68°F and 50% relative humidity
All ORABOND products are subject to careful quality control throughout the manufacturing process and are warranted to be of
merchantable quality and free from manufacturing defects. Published information concerning ORABOND products is based upon research
which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of
ORABOND products and the continuing development of new applications, the purchaser should carefully consider the suitability and
performance of the product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
ORABOND is a registered trademark of ORAFOL Europe GmbH.