Description
Orafol ORABOND 1397TM Double-sided Adhesive Tape
Description
This double-sided tape consists of a polyester film carrier, layered on both sides with a modified solvent acrylate adhesive. It
has a very good resistance against UV radiation, extreme temperatures, chemicals, solvents and humidity. Its highly shearresistant adhesive has an excellent durability when attached to metal, varnish and high energy surfaces. It has a good
adhesive durability when attached to low energy surfaces. Because of its high adhesive mass it is also appropriate for rough
or structured surfaces.
Carrier
Polyester film, 0.5-mil
Liner
White silicone-coated paper on both sides, with blue ORAFOL branding, 60#
Adhesive
Modified solvent acrylate
Area of Use
Used for the secure attachment of truck and car mirrors in plastic housings. Used as a self-adhesive medium for trims,
covers and cable trunks. For the extension and splicing of paper, textiles, plastic and metal films where high shear strength
and adhesion are required.
Technical Data
Thickness* (adhesive and carrier) 8.25-mil
Temperature resistance -40°F to +320°F, momentary up to 356°F
Resistance to solvents and chemicals With expert application resistant to most oils, grease,
fuels, aliphatic solvents, weak acids, salts and alkalis
LoopTack* (FINAT TM 9) 7.54 lb/in
Adhesive power* 5.48 lb/in after 1 min
(FINAT TM 1, on stainless steel, one side 6.85 lb/in after 20 min
covered with 2-mil polyester film) 7.99 lb/in after 24 h
Shear strength* >400 h at 73°F
(FINAT TM 8, on stainless steel, one side >6 h at 158°F
covered with 2-mil polyester film)
Temperature resistance* (S.A.F.T.) 284°F
Shelf life** 2 years
Application temperature > +59°F
Available lengths
Available widths (in inches)
55-yards
39, 61
slit rolls:1/2, 3/4, 1, 2
* average ** in original packaging, at 68°F and 50% relative humidity
IMPORTANT NOTICE
All ORABOND products are subject to careful quality control throughout the manufacturing process and are warranted to be of
merchantable quality and free from manufacturing defects. Published information concerning ORABOND products is based upon research
which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of
ORABOND products and the continuing development of new applications, the purchaser should carefully consider the suitability and
performance of the product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
ORABOND is a registered trademark of ORAFOL Europe GmbH.