ORAFOL ORAGUARD 210 PVC Laminating Film Semi Gloss

Description

ORAFOL ORAGUARD 210 PVC Laminating Film Semi Gloss
ORAGUARD® 210 PVC LAMINATING FILM
Description
2.5-mil, soft PVC film with a UV extension factor of two years. Available in gloss, semi-gloss or matte finish.
Release Liner
55# silicone-coated paper
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
A cold laminate for protection of medium-term indoor and outdoor digital print applications. Flat application ONLY.
Technical Data
Thickness (without liner and adhesive) 2.5-mil
Temperature Resistance Adhered to aluminum, -40°F to +176°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.74 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces) 4 years
Minimum Application Temperature 46°F
Available Lengths
Available Widths
150’ (50-yard)
30”, 36”, 40”, 50”, 54”, 60”
Recommended to be used in combination with ORAJET®
Series 3691, 3651, 3651RA, 3641, 3640, 3628,
3621, 3620, 3268, 3169RA, 3165, 3165RA, 3164, 3161DT
UV Protection Extension Factor +2 years
For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours
(48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate.