Description
ORAGUARD® 215DU PVC LAMINATING FILM
Description
Polymeric PVC film with a high level of UV protection. Available in gloss or matte.
Release Liner
55# silicone-coated paper
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
For the protection of indoor and outdoor large format graphic applications. Especially recommended for UV printed graphics.
Technical Data
Thickness* (without liner and adhesive) 3-mil
Temperature Resistance*** Adhered to aluminum, -58°F to +194°F, no variation
Resistance to solvents and chemicals
At room temperature, 72h after adhesion to aluminum,
resistant to water, cleaning agents, alcohol and aliphatic
solvents
Adhesive Power* (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 3.2 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Shelf Life** 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces) 5 years
Minimum Application Temperature 46°F
Available Lengths
Available Widths
150’ (50-yard)
54”, 60”
Recommended to be used in combination with ORAJET® Series 3850, 3691, 3651, 3651RA, 3551,
3551RA, 3551DT, 3169RA, 3165, 3165RA, 3109, 3105HT
UV Protection Extension Factor +3 years
For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours
(48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate