Description
Orafol ORAJET 3951
Orafol ORAJET 3951
2 Mil Cast High Performance Gloss White Inkjet Vinyl, Repositionable Adhesive with CommandForm™.
• 10 year outdoor durability.
• Repositionable opaque grey solvent adhesive with clean removability of 4 years.
• 90lb PE-coated silicone paper liner.
• ORACAL suggest laminating with Oraguard 290, 290F, or 293.
• Warranted for vehicle wraps and marine applications.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex.+
Description
Premium Cast PVC film in white and transparent, gloss
Release paper
PE-coated silicone paper, 148g/m², 168 μm
Adhesive
Solvent polyacrylate, repositionable, permanent, grey or transparent
Area of use
For long-term graphic applications, markings and decorations with the highest degree of brilliancy and durability in
outdoor areas, especially for complete car wrapping.
Printing method
Inkjet printing with solvent based inks, UV- or Latex inks
Technical Data
Thickness* (without protective paper and adhesive) 55 micron
Dimensional stability (FINAT TM 14) adhered to steel, no shrinkage in cross direction, in
length 0.1mm max.
Temperature resistance*** adhered to aluminium, -50°C to +100°C, no variation
Sea water resistance (DIN 50021) adhered to aluminium, after 100h/23°C no variation
Resistance to solvents and chemicals at room temperature, 72h after adhesion to aluminium,
short-term resistant to most oils and greases, fuels,
aliphatic solvents, weak acids, salts and alkalis
Fire behaviour (DIN 4102-1) Only flame resistant (class DIN 4102-B1) on steel
surface (indoor application, also printed)
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
18 N/25 mm
Tensile strength (DIN EN ISO 527) along: min. 19 MPa
across: min. 19 MPa
Elongation at break (DIN EN ISO 527) along: min. 120%
across: min. 120%
Shelf life** 2 years
Application temperature > +8°C
Service life by specialist application
under vertical outdoor exposure
(normal climate of Central Europe)
white: 10 years (not printed)
transparent: 8 years (not printed)
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe
Note
After printing the ink must be thoroughly dry in order to avoid any effect on the later combination with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be dried and cured
completely. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the
material. Furthermore the application information published by ORAFOL is to be considered. The batch traceability
according to ISO 9001 is possible on the basis of the roll number.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a
source of information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and
applications customers should independently determine the suitability of this material for their specific purpose, prior to use
Reviews
There are no reviews yet.