ORAJET 3164

Description

ORAJET 3164

ORAJET 3164
4 Mil Economy Grade PVC Gloss or Matte White Vinyl With Permanent Adhesive.
• 4 Year outdoor durability.
• Clear, permanent, water-based adhesive.
• 83lb silicone-coated paper liner.
• Great for interior or exterior signage, decals, nameplates, die-cut letters and POP’s.
• ORACAL suggests laminating with Oraguard 200 or 210.
• Print compatibility: Solvent, Eco- Solvent, UV, Latex, Screen Print.

ORAFOL Europe GmbH – Orafolstraße 2 – D 16515 Oranienburg
Telefon: +49(0)3301/8640 – Telefax: +49(0)3301/864100
Email: [email protected] – Internet: http://www.orafol.de
Technical data sheet
2012/06
Page 1 of 1

Description
Soft PVC film available in transparent and white. Surface glossy and matt.
Release paper
Silicone coated paper on one side, 135 g/m²
Adhesive
Polyacrylate, permanent, transparent
Area of use
For brilliant and colourful advertising efforts, for short- and medium-term outdoor use.
Printing method
Inkjet printing with solvent-based inks, UV- or latex inks

Technical data

Thickness* (without paper and adhesive) 100 micron
Dimensional stability (FINAT TM 14) adhered to steel, no shrinkage in cross direction, in
length max. 0.4 mm
Temperature resistance*** adhered to aluminium, -40°C to +80°C, no variation
Water resistance adhered to aluminium, after 48 hours/23°C no
variation
Fire behaviour (DIN 4102-1) only flame resistant (class DIN 4102-B1) on steel
surface (indoor application, also printed)
Adhesive power* (FINAT TM 1, after 24h, stainless steel) 16 N/25 mm
Tensile strength (DIN EN ISO 527) along: min. 19 MPa
across: min. 19 MPa
Elongation at break (DIN EN ISO 527) along: min. 130%
across: min. 150%
Shelf life** 2 years
Application temperature > +10°C
Service life by specialist application
under vertical outdoor exposure (normal climate of Central
Europe)
4 years (not printed)
* average ** in original packaging, at 20°Cand 50% relative humidity *** normal climate of Central Europe

Note
After printing the ink must be thoroughly dry in order to avoid any affect on the later combination with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The
compatibility of selected lacquers and paints should be tested by the user, prior to the application of the material.
Furthermore the application information published by ORAFOL is to be considered.

The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a
source of information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and
applications customers should independently determine the suitability of this material for their specific purpose, prior to use.

https://www.orafol.com/tl_files/content/downloads/technicaldatasheets/europe/en/orajet/orajet-3164-eu-en.pdf