Description
ORAJET 3164RA
ORAJET 3164RA
4 Mil Economy Grade PVC Gloss or Matte Vinyl with Clear Permanent Adhesive.
• 4 year outdoor durability.
• 3164RA has a clear permanent adhesive.
• 89lb silicone coated paper liner with RapidAir ® Technology.
• Great for interior or exterior signage, decals, nameplates, die-cut letters and POP’s.
• ORACAL suggests laminating with ORAGUARD 200 or 210.
• Print Compatibility: Solvent, Eco-Solvent, UV, Latex and Screen Print.
Description
4-mil, soft calendered PVC film in white with a gloss or matte surface and RapidAir ® Technology
Release Liner
89# silicone coated paper featuring advanced air release technology to facilitate quicker, easier application
Adhesive
Clear, water-based, permanent adhesive
Applications
For economical general signage, short- to medium-term flat indoor and outdoor applications including decals,
nameplates, die cut letters and POP displays. NOT for vehicle graphics or wraps.
Technical Data
Thickness (without liner and adhesive) 4 mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.016”
Temperature Resistance Adhered to aluminum, -40°F to +176°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 3.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
4 years (unprinted)
Minimum Application Temperature 50°F
Available Lengths
Available Widths (inches)
150’ (50-yard)
30, 50, 54, 60
Recommended Laminates ORAGUARD® Series 200, 210, 240
Print Compatibility Latex, Solvent, Eco-Solvent, UV Curable
ORACAL® recommends that printed film be allowed to dry for at least 24 hours at 70°F (48-72 preferred) before applying a laminate.
Attention
Recycling Recommendation: Waste class similar to household waste, is to be recycled according to the local regulations.
Surfaces to which the material will be applied must be cleaned thoroughly of dust, grease or any contaminants. Freshly lacquered or painted
surfaces should be allowed to stand for at least three weeks after complete curing. The compatibility of selected lacquers and paints should be
tested by the end-user prior to use.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without any guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications,
customers should independently determine the suitability of this material for their specific purpose, prior to use.