Description
ORAJET 3164XRA
ORAJET 3164XRA
4 Mil Economy Grade PVC Gloss or Matte Vinyl with Clear Permanent Adhesive.
• 4 year outdoor durability.
•3164XRA has a grey permanent adhesive.
• 89lb silicone coated paper liner with RapidAir ® Technology.
• Great for interior or exterior signage, decals, nameplates, die-cut letters and POP’s.
• ORACAL suggests laminating with ORAGUARD 200 or 210.
• Print Compatibility: Solvent, Eco-Solvent, UV, Latex and Screen Print.
ORAJET
3164X RA
ORAFOL Europe GmbH – Orafolstraße 2 – D 16515 Oranienburg
Telefon: +49(0)3301/8640 – Telefax: +49(0)3301/864100
Email: [email protected] – Internet: http://www.orafol.com
Technical Data Sheet
2012/23
page 1 of 1
Description
White soft PVC film, surface glossy and matt
Release paper
PE-coated silicone paper on both sides, 145g/m²
Adhesive
Polyacrylate, permanent, grey
Area of use
For brilliant and colourful digital advertising prints in short- and medium-term outdoor applications.
The “Rapid Air” technology enables easy and quick application without air inclusion, especially of large-sized decals.
Entrapped air can be easily removed simply by rubbing out under the film.
Printing method
Inkjet printing with solvent based inks, UV- or Latex inks
Technical Data
Thickness* (without protective paper and adhesive) 100 micron
Dimensional stability (FINAT TM 14) adhered to steel, no shrinkage in cross direction, in
length 0.4 mm max.
Temperature resistance*** adhered to aluminium, -40°C to +80°C, no variation
Water resistance adhered to aluminium, after 48h/23°C no variation
Fire behaviour (DIN 75200) adhered to steel, self-extinguishing
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
16 N/25 mm
Tensile strength (DIN EN ISO 527) along: min. 19 MPa
across: min. 19 MPa
Elongation at break (DIN EN ISO 527) along: min. 130%
across: min. 150%
Shelf life** 2 years
Application temperature > +10°C
Service life by specialist application
under vertical outdoor exposure
(normal climate of Central Europe)
4 years (not printed)
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe
Note
After printing the ink must be thoroughly dry in order to avoid any effect on the later combination with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The
compatibility of selected lacquers and paints should be tested by the user, prior to application of the material.
Furthermore the application information published by ORAFOL is to be considered.