ORAJET 3165

Description

ORAJET 3165

ORAJET 3165
3.75 Mil Calendered PVC Gloss or Matte White VinylWith Permanent Solvent Adhesive.
• 5 year outdoor durability.
• Grey opaque, solvent, permanent adhesive.
• 90lb PE-coated silicone paper.
• Great for interior or exterior signage, decals,nameplates, die-cut letters and POP’s.
• ORACAL suggests laminating with Oraguard 210.
• Print compatibility: Solvent, Eco-Solvent, UV,Latex.

http://www.spandex.com/Images/datasheet_ORAJET%203165_Grp_tcm43-11833.pdf

Product Data Sheet
Spandex Group, Excelsiorlaan 55, B-1930 Zaventem, Belgium
Tel. +32 (0)2 725 73 70 | Fax +32 (0)2 720 76 40 | www.spandex.com
Distributed by
ORAJET®
ORAJET 3165
3165 2011/04
Description
Special PVC film, white and transparent, in gloss, semi-gloss and matt surfaces
Release paper
PE-coated silicone paper, 148g/m², 168 µm
Adhesive
Solvent polyacrylate, permanent adhesive, grey and transparent
Area of use
For brilliant and colorful displays for digital large format prints in short- and medium-term outdoor applications
Thickness* 100 micron
Dimensional stability adhered to steel, no shrinkage in cross direction, in length 0.4 mm
max.
Temperature resistance adhered to aluminium, -40°C to +80°C, no variation
Seawater resistance adhered to aluminium, after 100h/23°C no variation
Resistance to solvents and chemicals at room temperature, 72h after adhesion to aluminium, short-term
resistant to most oils and greases, fuels, aliphatic solvents, weak
acids, salts and alkalis
Fire behaviour adhered to steel, self-extinguishing
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
18 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 19 MPa
across min. 19 MPa
Elongation at break (DIN EN ISO 527)
along min. 130%
across min. 150%
Shelf life** 2 years
Minimum application temperature > +8°C
Service life
under vertical outdoor exposure (normal climate of Central Europe)
5 years (not printed)
Attention:
After printing the ink must be thoroughly dry in order to avoid any affect on the later combination with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at
least three weeks and to completely cure respectively. The compatibility of selected lacquers and paints should be
tested by the user, prior to application of the material. Furthermore the application information published by ORAFOL
is to be considered