ORAJET 3268 6 Mil Removable Wall Graphics Inkjet Media

Description

ORAJET 3268 6 Mil Removable Wall Graphics Inkjet Media

ORAJET 3268 6 Mil Movable Wall Graphics Inkjet Media.
• Up to 2 year durability, indoor interior walls only.
• Low tack polyacrylate adhesive. Repositionable, allows for removing and reapplying.
• 83lb silicone-coated paper liner.
• Great for contour cut wall graphics (for murals use 3628).
• Clean removability up to 1 year.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex.

https://www.orafol.com/products/mixed/downloads/productsheets/americas/en/PracticalInformationFlyers/pi_removable-wall-graphics.pdf

ORAJET
3268 Wall Art Digital 2011/04
Description
Extra thick Soft PVC film. Available in white. Surface in matt.
Release paper
Silicone coated paper on one side, 135 g/m².
Adhesive
Polyacrylate, easily removable
Area of use
For indoor applications like decorations and advertisement, e.g. on inner walls.
Thickness* 150 micron
Dimensional stability adhered to steel, no measurable shrinkage in cross direction, in
length 0.4 mm max.
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
6 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 30 MPa
across min. 28 MPa
Elongation at break (DIN EN ISO 527)
along min. 180%
across min. 200%
Shelf life** 2 years
Application temperature > +10°C
Attention:
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any
contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces
should be allowed to dry for at least three weeks and to completely cure respectively. The compatibility of
selected lacquers and paints should be tested by the user, prior to application of the material. Furthermore
the application information published by ORAFOL is to be considered. The batch traceability according
to ISO 9001 is possible on the basis of the roll number.

ORAJET® Series 3268 Low-Tack Movable Wall Graphics Digital Media
Description
6-mil, economical soft PVC film featuring a special low-tack adhesive that enables the graphic to be removed easily.
Available in white with a matte surface.
Release Liner
83# silicone coated paper
Adhesive
Clear, water-based, removable adhesive
Applications
Designed for shorter-term interior contour-cut wall and window graphics. (An unprinted border around the graphic is
recommended to help ensure the success of the application)
Technical Data
Thickness (without liner and adhesive) 6 mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.016”
Temperature Resistance Adhered to aluminum, -40°F to +176°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 1.36 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 30 MPa
Across: Min. 28 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 180%
Across: Min. 200%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
2 years (unprinted; original application only)
Minimum Application Temperature 50°F
Available Lengths
Available Widths (inches)
150’ (50-yard)
30, 54, 60
Recommended Laminates ORAGUARD® Series 200, 210, 240
Print Compatibility Latex, Solvent, Eco-Solvent, UV Curable
ORACAL® recommends that printed film be allowed to dry for at least 24 hours at 70°F (48-72 preferred) before applying a laminate.