ORAMASK Paint Mask Vinyl

Description

ORAMASK Paint Mask Vinyl

ORAMASK Paint Mask Vinyl
ORAMASK® 810 Grey
Good for conformable applications such as complex curves, uneven or semiflexible substrates and surfaces.
The transparent grey film guarantees the visibility of the background.
Low-tack water based adhesive.
ORAMASK® 811 White
Rigid white PVC film designed for use on smooth, flat substrates and surfaces.
Low-tack water based adhesive.
ORAMASK® 813 Blue
This transparent blue masking film guarantees the visibility of the background making it the best choice for multi-color requirements or when working with fine details.
Polyacrylate with low-tack adhesive.

http://www.folii-adezive.ro/documente/produse/810.pdf

http://www.orafol.com/tl_files/content/downloads/technicaldatasheets/europe/en/oramask/oramask-811-stencil-film.pdf

http://www.folii-adezive.ro/documente/produse/813.pdf

Description
Translucently grey dyed special PVC film with matt surface.
Release paper
Silicone coated paper on one side, 137 g/m², which provides excellent waste-stripping properties.
Adhesive
Polyacrylate, removable, with low final peel adhesion
Area of use
Developed for use in stencil applications, especially for paint and spray techniques, e.g. vehicle lettering,
promotional lettering and signs in general. Due to its flexibility, this stencil film is suitable for spraying and
painting on even and especially on uneven surfaces. The translucency of the grey film ensures the visibility
of the surface underneath. Not suitable for wet application.
Thickness* 80 micron
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
1 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 19 MPa
across min. 19 MPa
Elongation at break (DIN EN ISO 527)
along min. 130%
across min. 150%
Shelf life** 2 years
Application temperature +10°C bis +25°C
Attention:
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any
contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should
be allowed to dry for at least three weeks and to completely cure respectively. The compatibility of selected
lacquers and paints should be tested by the user, prior to application of the material. Furthermore the
application information published by ORAFOL is to be considered. The batch traceability according to
ISO 9001 is possible on the basis of the roll number.