Description

PSA 3 mil Gloss White Vinyl – Tinted/Black Permanent Adhesive

Black permanent adhesive. Gloss white film for promotional graphics. Can be used on flat or slightly curved surfaces.

ADHESIVE BACKED 3 MIL GLOSS
WHITE VINYL PERMANENT
TINTED ADHESIVE FOR SOLVENT
PRINTERS
Great when glare is not needed, black adhesive gives 100% opacity
Can be used for interior and exterior signage
Uses include outdoor signage, promotional and point of purchase graphics, trade show displays
Compatible with OEM Solvent and Mild Solvent Ink
Construction
Product Number: SOL/WHTCAL/TINT
wound print side out
Adhesive: Tinted Black Permanent Acrylic
Film: 3 mil Vinyl
Liner: 88 lb Polycoated two sides
Finish: Gloss White
Gloss Level: 65 (avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests believed
to be reliable. The values are intended only as a source of information. They are given without
guarantee and do not constitute a warranty. The purchaser should independently determine,
prior to use, the suitability of this material for his/her specific purpose. (Data represents
averages and is not intended for use as a specification.)
Durability: Outdoor – 5 years unprinted

Minimum Application Temperature: + 40° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F
Temperature Resistance: -65° F to + 225° F
Chemical Resistance: Resistant to alkalies, mild acids, most
petroleum based oil, grease and aliphatic
solvent and salts.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 3.0 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity