Description

PSA 3 mil Matte White Vinyl – Tinted/Black Permanent Adhesive

Black tinted permanent adhesive. Completely blocks out light. Great for covering up prior graphics

Adhesive Backed 3 mil Matte White Vinyl
Tinted Permanent Adhesive
for Solvent, Latex & UV Printers
• Great when glare is not needed, black adhesive gives 100% opacity
• Can be used for interior and exterior signage
• Uses include outdoor signage, promotional and point of purchase graphics, trade
show display
• Compatible with OEM Solvent and Mild Solvent Ink
Construction
Product Number: SOL/MATCAL/TINT
Adhesive: Tinted Black Permanent Acrylic
Film: 3 mil Vinyl
Liner: 88# Lay Flat Liner
Finish: Matte White
Gloss Level: >10 (avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They
are given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification.)

Durability: Outdoor – 5 years unprinted
Minimum Application Temperature: + 40° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F
Temperature Resistance: -65° F to + 225° F
Chemical Resistance: Resistant to alkalies, mild acids, most
petroleum based oil, grease and
aliphatic solvent and salts.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hours
Stainless Steel 3.0 lb/in
Shelf Life: 1 year from ship date when stored in
proper conditions 70° F and 50% relative
humidity