Description

PSA 3 mil Sidewalk Gloss White Vinyl – Permanent Adhesive 54″ X 75′

Clear permanent adhesive. Gloss white film for slightly textured exterior asphalt and cured concrete surfaces. Use with slip-resistant outdoor floor laminate–KJ5FLRLAM. Outdoor life up to 60 days with lamination. Uses include outdoor signage, promotional and point of purchase graphics. Compatible with OEM Solvent and Mild Solvent Ink

 Adhesive Backed 3 mil Gloss White Vinyl
Gray Permanent Adhesive
for Solvent, Latex & UV Printers
• Designed for slightly textured exterior asphalt and cured concrete surfaces
• Use with slip-resistant outdoor floor laminate – KJ5FLRLAM
• Outdoor life up to 60 days with lamination
• Uses include outdoor signage, promotional and point of purchase graphics
• Compatible with OEM Solvent, Latex & UV Curable Inks
Construction
Product Number: SOL/SIDEWALK
Adhesive: 4 mil Permanent Acrylic
Film: 3 mil Vinyl
Liner: 90# Polycoated two sides
Finish: Gloss White
Gloss Level: 85 (avg.) @ 60°

 Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They
are given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification.)
Durability: Outdoor -5 years unprinted
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F
Chemical Resistance: Resistant to alkalies, mild acids, most
petroleum based oil, grease and aliphatic
solvent and salts.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 7.5 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity