Description
USB 1.1 Over Cat5 Superbooster Extender Dongle Kit (TAA Compliant)
Dongle kit extends USB 1.1 signals over Cat5 up to 150 feet over Cat5
4.2
|
23 Reviews
Product # :
29341
Input :
(1) USB-A Male
Output :
(1) USB-A Female
Description Features Certifications Specs Uses Support
Product Features
Extends a USB 1.1 signal up to 150ft over category cables
Allows for flexible positioning of USB peripherals
Small form factor reduces installation clutter
Kit includes both the transmitter and receiver units
Product Description
Conquer USB length limitations, and put your USB devices where you want them with our USB superbooster. This pocket-sized device extends the distance of a USB device to a host computer up to 150 feet so you can place your USB camera, printer, web cam, keyboard/mouse extension, or any other USB device exactly where you want it! This booster is powerful yet simple, with no drivers to install or special software required so it’s compatible with any computer that supports USB.
This plug-and-play device consists of a base unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect your cables to your device; then connect to your computer and USB peripheral and you’re up and running. Bus-powered, it requires no external power source. Instead, the superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver, a USB hub placed at the receiver or any other USB device that would be connected to the receiver. Connecting the transmitter to the computer without first making other connections may result in damage to the Superbooster.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.
Base Connectors: One USB Type A Male and One RJ45 Female
Remote Connectors: One USB Type A Female and One RJ45 Female
When making any changes to the setup, follow these steps:
1. Disconnect the USB Superbooster transmitter from the computer.
2. Make any Superbooster system changes*
3. Ensure that the USB device is connected to the receiver and the Cat5 cable to both the transmitter and receiver before connecting the transmitter to the computer.
4. Connect the USB Superbooster transmitter to the computer.
*Note: Changes may include: swapping out boosters, troubleshooting any cable issues, etc.
Download the manual from the Support tab
Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like
Wiremold® Uniduct 2900 External Elbow – White (TAA Compliant)
$1.99
DisplayPort HDBaseT Extender over Cat Transmitter (TAA Compliant)
$329.99
DisplayPort to HDMI® HDBaseT Extender over Cat (TAA Compliant)
$658.99
Wiremold® Uniduct 2800 External Elbow – White (TAA Compliant)
$1.99
Wiremold® Uniduct 2800 Tee – White (TAA Compliant)
$1.99
Infrared (IR) Remote Control Repeater Kit (TAA Compliant)
$63.99
Wiremold® Uniduct 2700 Internal Elbow – Ivory (TAA Compliant)
$1.99
Product Certifications
Product Specifications
Color : Black
UPC : 757120293415
Warranty : 1 Year
Vendor : C2G
Weight : 0.359 LB
Download a PDF with the technical specifications of this product on the Support tab
USB Specifications
Maximum extension distance: 150ft
USB specification: USB 1.1
USB transfer rates supported: Full Speed – 12Mbps, Low Speed – 1.5Mbps
Category Cable Requirements
Category cables supported – Cat5, Cat5E, Cat6
Cable pinouts supported – T568B – Recommended, T568A
Physical Characteristics
Transmitter
USB connector – USB A Male
Data connector – RJ45 Female
Dimensions – 54.35 x 25.4 x 37.85mm
Cable length – 13.00in
Receiver
USB connector – USB A Female
Data connector – RJ45 Female
Dimensions – 54.35 x 25.4 x 37.85mm
When making any changes to the setup, follow these steps:
1. Disconnect the USB Superbooster transmitter from the computer.
2. Make any Superbooster system changes*
3. Ensure that the USB device is connected to the receiver and the Cat5 cable to both the transmitter and receiver before connecting the transmitter to the computer.
4. Connect the USB Superbooster transmitter to the computer.
*Note: Changes may include: swapping out boosters, troubleshooting any cable issues, etc.
Product Uses
Diagram above shows how one input such as the PC can connect to the base unit which distributes the signal to the remote unit that then can connect to an output such as the USB Hub.
Product Support
Downloads
Download the manual
Download the technical specifications
Diagram above shows how one input such as the PC can connect to the base unit which distributes the signal to the remote unit that then can connect to an output such as the USB Hub.
Reviews
There are no reviews yet.