USB 1.1 Over Cat5 Superbooster Extender Dongle Transmitter

Description

USB 1.1 Over Cat5 Superbooster Extender Dongle Transmitter
Dongle transmitter extends USB 1.1 signals over Cat5 up to 150 feet over Cat5 when paired with a receiver
5.0
 | 
2 Reviews

Product # :
29348

Input :
(1) USB-A Male
Output :
(1) RJ-45 Female
Description Features Certifications Specs Uses Contents Support
Product Features
• Extends a USB 1.1 signal up to 150ft over category cables
• Allows for flexible positioning of USB peripherals
• Pair with a wall plate or dongle receiver for complete solution
Product Description
One component of a complete solution that, when paired with a receiver (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it! Our USB superbooster dongle is powerful yet simple, with no drivers to install or special software required. It’s also compatible with any computer that supports USB.

The overall plug-and-play solution consists of this dongle transmitter, and your choice of a compatible receiver that is sold separately: the 1-port dongle (#29350 or #29353), the 2-port wall plate (#29345), the 2-port dongle (#29346) or the 4-port dongle (#29347). Customize the configuration to your specific needs! This versatility is ideal for applications where you need more than one receiving USB device, or when you need a receiving dongle instead of a receiving wall plate.

The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy installation. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster dongle is bus-powered, no external power source is required. Compliant with USB specification 1.1.

Input: One USB Type A Male
Output: One RJ45 Female

Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.

Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.

•Download the manual from the Support tab
•Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
10ft Pro Series Single Link DVI-D™ + 3.5mm A/V Cable M/M – In-Wall CL2-Rated
$40.99
2m SC-ST 50/125 OM2 Duplex Multimode PVC Fiber Optic Cable – Orange
$18.99
Wiremold® Audio/Video Interface Plates (AVIP) Keystone Jack Plate (TAA Compliant)
$11.99
Wiremold® Audio/Video Interface Plates (AVIP) Blank Plate-Single (TAA Compliant)
$11.99
Wiremold® Audio/Video Interface Plates (AVIP) 3.5mm Stereo Mini Jack to Captive Screw Term (TAA Compliant)
$39.99
1U Cable Pass-Through Panel with Brush Strip (TAA Compliant)
$39.99
10/100Base-TX to MM 100Base-FX ST Media Converter (TAA Compliant)
$100.99
Product Certifications
Product Specifications
Color : Black
UPC : 757120293484
Warranty : 1 Year
Vendor : C2G
Weight : 0.250 LB
•Download a PDF with the technical specifications of this product on the Support tab
System Requirements
• One superbooster receiver: 1-port dongle (#29350 or #29353), 2-port dongle (#29346), 4-port dongle (#29347) or 2-port wall plate (#29345) each sold separately

USB Specifications

• USB specification – USB 1.1
• USB transfer rates supported – Full Speed – 12Mbps, Low Speed – 1.5Mbps

Category Cable Requirements

• Category cables supported – Cat5, Cat5E, Cat6
• Cable pinouts supported – T568B – Recommended, T568A

Physical Characteristics

• USB connector – USB A Male
• Data connector – RJ45 Female
• Dimensions – 2.14 x 1.00 x 1.49in
• Cable length – 6.00in
Product Uses

Diagram above shows how one input such as the PC can connect to the dongle transmitter which distributes the signal to the receiver that then can connect to an output such as the USB Hub.
Package Contents
• One USB superbooster dongle transmitter
• One RJ45 toolless IDC connector
• User Guide
Product Support
Downloads

• Download the manual

• Download the technical specifications