Description
USB 1.1 Over Cat5 Superbooster Extender Wall Plate Kit
Wall plate kit extends USB 1.1 signals over Cat5 up to 150 feet over Cat5
4.3
|
7 Reviews
Product # :
29342
Connector 1 :
(1) USB-B Female
Connector 2 :
(1) USB-A Female
Description Features Certifications Specs Uses Contents Support
Product Features
Extends a USB 1.1 signal up to 150ft over category cables
Allows for flexible positioning of USB peripherals
Transmitter and receiver are built into wall plates
Kit includes both the transmitter and receiver units
Product Description
Conquer USB length limitations, and put your USB devices where you want them with our patent-pending USB superbooster wall plate. This wall plate solution extends the distance of a USB device to a host computer up to 150 feet so you can place your USB projector, camera, printer, web cam, hub, or any other USB device exactly where you want it! This wall plate is powerful yet simple, with no drivers to install or special software required so it’s compatible with any computer that supports USB.
This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don’t want unsightly visible cables lying around.
Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. Compliant with USB Specification 1.1.
Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.
Download the manual from the Support tab
Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like
USB 1.1 Over Cat5 Superbooster Extender Wall Plate Transmitter
$69.99
25ft VGA + 3.5mm A/V Cable with Rounded Low Profile Connectors M/M – Plenum CMP-Rated
$109.99
75ft Select VGA + 3.5mm Stereo Audio A/V Cable M/M – In-Wall CMG-Rated
$101.99
1-Port USB 1.1 Over Cat5 Superbooster Extender Dongle RJ45 Female to USB B Male Receiver
$49.99
15ft Cat6 Non-Booted UTP Unshielded Ethernet Network Patch Cable – Plenum CMP-Rated – Blue (TAA Compliant)
$22.99
XLR Female Inline Connector (TAA Compliant)
$6.99
12ft Flexima VGA + 3.5mm A/V Cable M/M – In-Wall CL3-Rated
$64.99
Product Certifications
Product Specifications
Color : White
UPC : 757120293422
Warranty : 1 Year
Vendor : C2G
Weight : 0.464 LB
Download a PDF with the technical specifications of this product on the Support tab
Product Uses
Diagram above shows how one input such as the PC can connect to the transmitter which distributes the signal to the receiver that then can connect to an output such as the USB Hub.
Package Contents
One USB SuperBooster Wall Plate Transmitter Unit
One USB SuperBooster Wall Plate Receiver Unit
Two RJ45 toolless IDC connectors
Four #6 x 32 slotted/Phillips screws
User manual
Product Support
Downloads
Download the manual
Download the technical specifications
Charles (verified owner) –
Good quality.
Samuel (verified owner) –
Very well worth the money.